Author Topic: Frigidare dryer model FSG748GFS1  (Read 421 times)

Offline spinner101

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 17
Frigidare dryer model FSG748GFS1
« on: February 22, 2013, 10:47:31 AM »
Frigidare dryer model FSG748GFS1. I replaced the tub bearing and the drum glides, waited until the next day to run it because the glue needed to dry on the drum glide. The lady of the house decided to clean the inside of the dryer cabinet, while cleaning she knocked the ignitor out of its bracket and it grounded out and caused the timer to keep running and the drum wouldn't stop when the door was opened. We'll I put in a new ignitor and it glows but it will not ignite and now the timer will not advance either. I am wondering if points in the timer may have gotten welded together when the ignitor was grounded.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1475
  • Country: us
    • Buy me a beer through paypal
Re: Frigidare dryer model FSG748GFS1
« Reply #1 on: February 22, 2013, 11:01:35 AM »
If the ignitor glows and then goes out without lighting the burner, replace the gas coils.  If it glows continuously, replace the flame sensor. The timer won't advance on the automatic cycle if there's no heat.

donate
$1, $2, $5, $10, $20, $50
 

Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 3921
Last post August 07, 2007, 08:21:33 AM
by AJ
maytag dryer model # md 3500 (no heat)

Started by #13

Replies: 5
Views: 6113
Last post December 05, 2007, 07:15:02 AM
by apptech
Kenmore Dryer Model 110.76660100 Heater wires burned

Started by gwilli

Replies: 2
Views: 5530
Last post January 16, 2008, 01:31:15 PM
by JWWebster
Late Model Hotpoint dryer

Started by JWWebster

Replies: 1
Views: 1044
Last post September 11, 2011, 08:19:18 AM
by AJ
ge profile ,harmony model ,electric dryer

Started by tiffngab

Replies: 2
Views: 2416
Last post March 17, 2009, 08:22:35 PM
by JWWebster
Access to Igniter and Coils in GE Adora Dryer Model

Started by rhroop

Replies: 0
Views: 2765
Last post June 07, 2009, 09:42:27 AM
by rhroop