Author Topic: buttons on Jenn-air panel do not work  (Read 1098 times)

Offline mjston

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 1
  • Country: us
buttons on Jenn-air panel do not work
« on: February 21, 2013, 05:11:30 PM »
I have a Jenn-air electric downdraft electric slide in range model JES9800AAB.
The top three buttons on the right hand side BAKE, BROIL and QUICK PREHEAT do not function, also the top oven
element (broiler) does not heat up during preheat of oven cleaning. There is no beeping sound when any of these
three buttons are pressed. Can you identify the likely component that I should replace?

I have cleaned the ribbon cable connection on the control panel.... If the touch panel is defective is there a source for the touch panel"only" the web sites i visited only sell the whole front panel of the range.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 650
  • Country: us
Re: buttons on Jenn-air panel do not work
« Reply #1 on: February 22, 2013, 01:59:20 PM »
I have had this same problem twice on my Jenn Air range. Both times the new control panel fixed it. Unfortunately they are expensive. I don't think you will find just the touch pad.

 

Amana built-in wall oven that some of the touch panel buttons won't work

Started by tagarman

Replies: 14
Views: 4828
Last post February 24, 2013, 11:31:38 AM
by theoldstoveguy
Jenn-Air electric range with some of the control buttons that do not work

Started by tagarman

Replies: 6
Views: 1624
Last post March 15, 2014, 10:26:50 PM
by AJ
control panel clock and oven will not work

Started by Pens Fan

Replies: 3
Views: 3227
Last post November 04, 2008, 06:38:02 PM
by Pens Fan
7" Touch Screen Panel/Module for Late Model Jenn Built-ins (Scrap For Grab)

Started by rmbraught

Replies: 2
Views: 1883
Last post June 18, 2010, 04:05:10 PM
by rmbraught
Jenn Air (Maytag) M#JGS8750BDS "bake" & "broil" buttons do not respond

Started by bobbyflagg

Replies: 6
Views: 2505
Last post February 25, 2013, 01:25:40 PM
by JWWebster
Jenn-Air JES9750AAB Range Control panel numbers not working

Started by justinc25

Replies: 19
Views: 8061
Last post July 18, 2012, 06:40:15 PM
by justinc25