The centrifugal switch on the motor is stuck in the closed position.May be due to a lint buildup.You may be able to unstick it.If not,AJ is correct....motor time.
Sounds to me heating element shorted to ground & blew thermal fuse, check with ohm meter.
You can check the element to ground by placing 1 meter lead on the element terminal and the other on the element housing.Then the other element lead and housing.The meter set for continuity should not read.If it reads,it is broken and shorted.The thermal fuse if bad,would not allow any sound when the start button is pushed.
Started by lalakelley
Started by pcornelius
Started by llew_x
Started by weadhopper
Started by connie
Started by craigb