Please help! I've been having some problems with heavier loads not spinning the water out during a wash cycle. Thought it was just "one of those things". I would restart on the rinse/Drain & Spin and that would fix the problem. Now, however, I just had a similar heavy load just sitting in the washer soaking wet. When I try to start the rinse/drain cycle the washer lights up like it will start but then then shuts down & will not start the cycle. After emptying the washer and getting as much water out as possible I put a light load in and used the normal/casual cycle. The washer filled, started to agitate, then shut down without continuing its cycle, again leaving water and soaking clothes. Thanks in advance for any help!