Author Topic: washer wont spin and sometimes shuts off mid cycle  (Read 10196 times)

Offline imharley

  • VIP Member
  • Member Since: May 2008
  • Posts: 7
Re: washer wont spin and sometimes shuts off mid cycle
« Reply #10 on: May 10, 2008, 10:41:27 AM »
also, it only shut off during wash cycle between 2 and 3, never any other time

Offline WasherGuy

  • VIP Member
  • Member Since: May 2008
  • Posts: 1
Re: washer wont spin and sometimes shuts off mid cycle
« Reply #11 on: May 29, 2008, 07:32:57 PM »
The wax motor and board are probably failed, however when your machine did spin did you say it sounded like a rocket taking off?  I always compared it to a turbo prop taking off, but either way it sounds like your bearings are Kaput.  Is there any wobble to the tub?  Meaning, can you reach in and move the inner tub independently from the outer tub?  If so your Bearings and possibly your tub support assembly have failed.  This could contribute to a Motor control failure along with the main control and wax motor in the door lock.

Offline JMM

  • VIP Member
  • Member Since: Jun 2012
  • Posts: 1
Re: washer wont spin and sometimes shuts off mid cycle
« Reply #12 on: June 12, 2012, 03:40:26 AM »
Looks like I have the same issue going on - washer will not start the spin cycle - can I get the part numbers for the control board and wax motor please

Thanks,
JMM

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9598
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: washer wont spin and sometimes shuts off mid cycle
« Reply #13 on: June 12, 2012, 04:54:18 AM »
Hi JMM,

Looks like I have the same issue going on - washer will not start the spin cycle - can I get the part numbers for the control board and wax motor please

Thanks,
JMM

Is the model number of your washer also, MLE2000AYW

If so these are the part numbers.

Wax Motor Part # 22002119



Control Board Part # 22004325
Hope you find our website helpful.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 662
  • Country: us
Re: washer wont spin and sometimes shuts off mid cycle
« Reply #14 on: June 12, 2012, 07:56:35 PM »
These neptunes have 2 tub displacement switches and an inertia switch. One on the top of the tub, one on the side of the tub,
and one on the bottom of the tub. They are wired in series so if any one of them is open or if the wire breaks at one of the switches it
will not go into the high speed spin.

 

GE washer stops mid cycle & wont spin out completely

Started by kstump27

Replies: 2
Views: 8176
Last post July 07, 2009, 06:23:24 AM
by Repair-man
Frigidaire front load washer wont spin cycle

Started by Scott7m

Replies: 10
Views: 6667
Last post May 17, 2010, 07:58:24 AM
by Repair-man
Washer stops mid cycle. Wont spin. replaced door lock

Started by Sandinmaheye

Replies: 7
Views: 1886
Last post March 03, 2013, 12:42:49 PM
by Sandinmaheye
kenmore washer wont spin

Started by futch13

Replies: 5
Views: 4958
Last post October 09, 2007, 12:28:49 PM
by rickgburton
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 3692
Last post December 25, 2007, 09:41:02 PM
by AJ
washer works except spin cycle and has a burning rubber smell.

Started by hogslayer

Replies: 4
Views: 5177
Last post February 19, 2008, 03:50:55 PM
by JWWebster