Forum > Washer Repair

Kenmore HE Topload Washer Out of Balance (Display shows UE) Model 796.29002000

<< < (2/10) > >>

domain:
Should only show in spin when outer tub is engaged to the motor assembly. When in agitate, the tub is locked in to a "static state" only allowing the agitator plate to move. I have updated LG top loaders and had the machine display unbalanced when EMPTY after the update. I then replaced the display assembly, which appeared to take care of the issue. No guarantees on these machines, they are VERY picky. :D

rockinrobin:
Is the Display Assy. also known as the Main PCB?
If not, can you give me the Part Number.

domain:
I would wait for others to chime in, as I do not want any money WASTED. Part A062- EBR67460502 :D
http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Washer-Parts/Model-79629002000/0583/0153200/F1103066/00001

rockinrobin:

--- Quote from: domain on February 12, 2013, 07:07:10 PM ---I would wait for others to chime in, as I do not want any money WASTED. Part A062- EBR67460502 :D
http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-elite-Parts/Washer-Parts/Model-79629002000/0583/0153200/F1103066/00001

--- End quote ---
My washer is out of warranty, however should I call Sear's to see if they will send me the part at no charge since the Model# & S/N were listed on the recall.

domain:
You may not have too much luck with them sending you the part. However if the recall update seemed to make it worse, ask if it may be possible to have the display PCB be replaced with the current software uploaded. The part numbers ARE different. Does it seem the same or worse/better than before/after the update?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version