Author Topic: Whirlpool washer won't agitate or spin...  (Read 909 times)

Offline jbe

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 3
  • Country: us
Whirlpool washer won't agitate or spin...
« on: February 10, 2013, 06:28:32 PM »
My Whirlpool washer Ultimate Care II model LSQ964KQ1 won't agitate or spin.  It does drain.  When it is supposed to agitate or spin it makes a loud humming noise.  Can you give me some direction as to what is wrong and how to repair it?  TIA!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool washer won't agitate or spin...
« Reply #1 on: February 10, 2013, 06:50:44 PM »
This washer is a direct drive model. it does not have a belt. Situated between the motor and tranny is a coupler. If the washer is overloaded with a rug or has too little water and too big of a load these couplers break. Sometimes just age breaks em, wear and tear. Easy fix. On these washers the case is easily removed so you can access the innards. I made a page chock full of repair videos on these washers. Check it out: DIRECT DRIVE WASHER
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline jbe

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 3
  • Country: us
Re: Whirlpool washer won't agitate or spin...
« Reply #2 on: February 10, 2013, 06:53:07 PM »
Thanks for the info.  We'll pull apart the washer and check it out. 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9377
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool washer won't agitate or spin...
« Reply #3 on: February 10, 2013, 07:00:28 PM »
Hi,

Sounds like a bad motor coupler, part # 285753A

Here is a video you may find helpful.
Motor Coupler Help Video

Let us know what you find or if you have any other questions.

Thanks for posting!
Hope you find our site helpful.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9377
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool washer won't agitate or spin...
« Reply #4 on: February 11, 2013, 10:43:34 PM »
 :popcorn:
Hope you find our site helpful.

Offline jbe

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 3
  • Country: us
Re: Whirlpool washer won't agitate or spin...
« Reply #5 on: February 13, 2013, 08:15:36 PM »
Thank you for the diagnosis and videos.  They were great.  Thanks to these we (and by we I mean my wonderful husband) were able to repair the washer ourselves.  Ordered the part early Monday, it arrive Tuesday and he installed it and we've run the washer several times since.  Thanks for your help.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9377
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Whirlpool washer won't agitate or spin...
« Reply #6 on: February 13, 2013, 08:19:00 PM »
Awesome!
Thanks for the update.  O0
Hope you find our site helpful.

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 27603
Last post January 02, 2009, 01:09:38 PM
by AJ
Whirlpool Washer - No Agitate or Spin

Started by AJ

Replies: 0
Views: 2337
Last post December 27, 2007, 07:58:27 PM
by AJ
whirlpool washer won't agitate or spin

Started by whirlpool problem

Replies: 6
Views: 6932
Last post May 02, 2008, 12:33:26 PM
by AJ
Whirlpool Washer no Agitate or Spin

Started by TechnicianBrian

Replies: 0
Views: 1889
Last post April 07, 2008, 09:11:45 PM
by TechnicianBrian
Whirlpool Washer will agitate but won't spin, not the coupler

Started by Haleydawg

Replies: 11
Views: 19796
Last post April 29, 2008, 07:12:26 PM
by JWWebster
Whirlpool Washer won't Agitate or Spin

Started by TechnicianBrian

Replies: 1
Views: 19200
Last post April 05, 2009, 10:21:46 AM
by AJ