Author Topic: Water remains at pump out at EOC FDB1050REM2  (Read 653 times)

Offline def

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 95
  • Country: us
  • I'll fix anything...sometimes, I'm successful.
Water remains at pump out at EOC FDB1050REM2
« on: February 09, 2013, 12:09:09 PM »
My 5 year old Frigidaire FDB1050 dishwasher leaves the tub almost full of water after the last rinse. The heated dry cycle proceeds and the machine shuts off leaving behind the last rinse water at the EOC. The attached photo shows the drain connection. I can manually drain the washer manually using the pump.

Where should I start looking to correct this?

Thanks all.  :thanks:
I used to repair RADAR then they discontinued vacuum tubes. Pity

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9430
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Water remains at pump out at EOC FDB1050REM2
« Reply #1 on: March 22, 2013, 09:53:54 AM »
Guess I missed seeing this one, sorry.
What did you end up finding wrong with it?
Hope you find our site helpful.

 

Whirlpool Dishwasher - Does not pump the water out.

Started by AJ

Replies: 0
Views: 8912
Last post January 17, 2008, 10:34:53 PM
by AJ
Replaced DishW MTR/pump assembly. Now no water

Started by Bill1015

Replies: 7
Views: 3369
Last post March 30, 2008, 09:11:27 PM
by AJ
Replaced Pump/Mtr Assembly. Now no Water

Started by Bill1015

Replies: 1
Views: 1929
Last post March 29, 2008, 11:13:41 PM
by Al Capone
154640201 Frigidaire Dishwasher Water Drain Pump

Started by AJ

Replies: 0
Views: 4999
Last post April 03, 2009, 12:29:25 PM
by AJ
154580301 Frigidaire Dishwasher Water Drain Pump

Started by AJ

Replies: 0
Views: 4989
Last post April 15, 2009, 04:21:35 PM
by AJ
8193513A Whirlpool Dishwasher Water Pump & Motor Assembly

Started by AJ

Replies: 0
Views: 4230
Last post April 25, 2009, 01:41:13 PM
by AJ