GE Profile top load leak

[jonshow]

Wife ran a very heavy unbalanced load that slammed the washer 8-10 times. Shortly after water began leaking out of the flood hose during extra large cycles.  I checked the pressure tube and switch - both working fine. Seems like some different noises coming from under the tub when it agitates, but nothing looks lose.  The outer tub seems like it's moving quite a bit during agitation - that's when water splashes up and out of the flood hose, but all bungees and suspension rods are attached and intact.

Any guesses?

[domain]

Since you did not post a model number, I am thinking to check your mode shifter if applicable. 

[bigbuck]

Good guess without model number, mode shifter love to spin & agitate @ the same time.

Sent from my MB865 using Tapatalk 2