Author Topic: GE GSC23KGTA WW  (Read 659 times)

Offline JODOTOM

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 1
  • Country: us
GE GSC23KGTA WW
« on: February 06, 2013, 02:54:31 PM »
NO WATER THROUGH DOOR, NEW FILTER , WATER TO ICE MAKER ?
« Last Edit: February 06, 2013, 02:57:53 PM by JODOTOM »

Offline domain

  • Technician
  • Member Since: Nov 2012
  • Posts: 667
  • Country: us
Re: GE GSC23KGTA WW
« Reply #1 on: February 06, 2013, 04:52:00 PM »
Bad 2 way water valve? Basic troubleshooting is required. :D

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 612
  • Country: us
    • Appliance repair
Re: GE GSC23KGTA WW
« Reply #2 on: February 06, 2013, 05:42:25 PM »

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 612
  • Country: us
    • Appliance repair
Re: GE GSC23KGTA WW
« Reply #3 on: February 06, 2013, 05:43:43 PM »
This kit comes with instructions on how to install.

Offline dab147315

  • Technician
  • Member Since: Oct 2010
  • Posts: 1030
  • Country: us
Re: GE GSC23KGTA WW
« Reply #4 on: February 07, 2013, 08:33:54 AM »
Start with the water valve first which is the most common problem and i like to use a cheater power cord after i ohm it out first to see that i get a good water flow.Then go from there.Basis first.Or first listen for a chick from the dispenser the micro switch or a hum from water valve while pushing dispenser handle. :)

Offline schleven

  • Technician
  • Member Since: Nov 2010
  • Posts: 378
  • Country: us
    • www.katy-appliance-repair.com
Re: GE GSC23KGTA WW
« Reply #5 on: February 07, 2013, 10:38:58 AM »
is that heater kit good for all GE fridges with the frozen line problem?
"It's not what happens to you, it's what you do about it"

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 612
  • Country: us
    • Appliance repair
Re: GE GSC23KGTA WW
« Reply #6 on: February 07, 2013, 12:14:43 PM »
This kit will work on most units. There has to be neccessary wiring. As for the best way to diagnose, simply remove toe kick and separate 5/16 coupler on water line. Push paddle for water, if it pisses on the floor then you know there is blockage in freezer door. Install this kit.