Author Topic: Washer won't agitate  (Read 1494 times)

Offline ezridertx

  • VIP Member
  • Member Since: May 2008
  • Posts: 1
Washer won't agitate
« on: May 12, 2008, 12:21:15 AM »
all cycles work,fills,spins,rinses,drains but it won't agitate.Opened the front,lifted the bottom ,put a support block as to check belt tension and wear on belt.Belt has to be good cause the motor slides on the mounting plate for the cycling of rinse and spin no problem spins fine all three pulley work(metal motor,metal water pump and plastic large main pulley under drum.I tried turning the agitator aluminum housing top side of main pulley it was real hard to turn,then used pulley and belt to turn it moves a little real freely like a harmonic balancer on car engine then tightens up and pulley then turns but the agitator doesn't move. Any solutions or advice appreciated,handy but not my area of expertise. Thanks

Offline Al Capone

  • Administrator
  • VIP Member
  • Member Since: Feb 2008
  • Posts: 409
  • Country: us
    • ApplianceJunk.com
Re: Washer won't agitate
« Reply #1 on: May 12, 2008, 07:17:13 AM »
Hi,

Please post the full model number.

Thanks,
RepairClinic.com - Order now for same day shipping. 365 day return policy!

AppliancePartsPros.com - Over 1 Million Appliance Parts In-Stock. 365-Day Hassle Free Return Policy!

 

Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 28893
Last post January 02, 2009, 01:09:38 PM
by AJ
GE Washer makes clicking noises and won't agitate (sometimes)

Started by brianhirsch

Replies: 8
Views: 9424
Last post October 17, 2007, 08:52:09 AM
by rickgburton
Admiral washer AW20N2Y won't agitate

Started by faoc

Replies: 13
Views: 6239
Last post November 20, 2007, 10:09:37 PM
by faoc
Whirlpool Washer - No Agitate or Spin

Started by AJ

Replies: 0
Views: 2616
Last post December 27, 2007, 07:58:27 PM
by AJ
Whirlpool Washer - Does not agitate very good.

Started by AJ

Replies: 0
Views: 2013
Last post December 30, 2007, 09:51:09 PM
by AJ
Maytag Performa Washer will fill (after changing snubber) but will not agitate

Started by PD

Replies: 10
Views: 9088
Last post January 01, 2008, 05:14:06 PM
by AJ