Author Topic: $160 hi limit thermostat on ge dryer WTF?  (Read 5463 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9478
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #30 on: March 31, 2013, 07:29:26 AM »
That $3 vs. $112 capacitor is crazy.
Hope you find our site helpful.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1521
  • Country: us
    • Buy me a beer through paypal
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #31 on: April 01, 2013, 10:30:20 AM »
Sub the WD8X181 to 913108 for less than 1/3 the cost.

Offline ScottyMo1

  • Technician
  • Member Since: Nov 2011
  • Posts: 170
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #32 on: April 04, 2013, 06:37:38 AM »
I had a GE dishwasher this week with a bad touchpad. 527.00!!!!!  ???

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1334
  • Country: us
    • Buy me a beer through paypal
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #33 on: April 04, 2013, 09:11:29 AM »
GE downdraft, bad up/down button. $246.00

Online LowSL2

  • Technician
  • Member Since: Dec 2011
  • Posts: 876
  • Country: us
  • Fletch F. Fletch
    • Buy me a beer through paypal
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #34 on: April 04, 2013, 09:55:34 AM »
Ge Monogram range hood. Knob keeps falling off. New knob = $98...

Sent from my DROID BIONIC using Tapatalk 2

LowSL2
15 Years of Professional Appliance Repair Experience

Offline desert

  • VIP Member
  • Member Since: Apr 2013
  • Posts: 17
  • Country: us
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #35 on: April 09, 2013, 09:23:05 AM »
speaking of repair clinic and dryer coils. They say that trying to test dryer coils with a multitester would be inconclusive. Is that true? This is an electric part correct?. Looking for continuity would be a waste of time.?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9478
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #36 on: April 09, 2013, 09:32:12 AM »
speaking of repair clinic and dryer coils. They say that trying to test dryer coils with a multitester would be inconclusive. Is that true? This is an electric part correct?. Looking for continuity would be a waste of time.?


Got a link to where you read that?


By multi tester do you mean multimeter or some kind of continuity tester with just a light and/or beeper on it?


This video talks about checking a heating element to check continuity on a dryer heating element.
Dryer Heating Element Help Video


I use a multimeter all the time to check continuity on dryer heating elements to see if they are bad or not.
Hope you find our site helpful.

Offline desert

  • VIP Member
  • Member Since: Apr 2013
  • Posts: 17
  • Country: us
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #37 on: April 09, 2013, 10:27:47 AM »
when i say multitester i am mean a fluke digital VOM. I do not have a link i sent them a private message asking them what readings i should get on a meter for an ohms check and their response was testing the coils would be inconclusive.
« Last Edit: April 09, 2013, 10:29:40 AM by desert »

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9478
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #38 on: April 09, 2013, 10:47:14 AM »

Quote
when i say multitester i am mean a fluke digital VOM.
Cool, you a Fluke fan too? Love my Flukes!  O0


Quote
I do not have a link i sent them a private message asking them what readings i should get on a meter for an ohms check and their response was testing the coils would be inconclusive.


Hmm, don't know why they would say that.
How did they suggest testing it then?


Hope you find our site helpful.

Offline desert

  • VIP Member
  • Member Since: Apr 2013
  • Posts: 17
  • Country: us
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #39 on: April 09, 2013, 12:01:55 PM »
How do they suggest testing?..good question. I would see if i can pull up that message later but i think what they were trying to get at is just replace them.  I never got to the bottom of actually testing the coils or what the ohms reading should be. Oh, and yes I am a fluke fan:) :cheers:

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #40 on: April 09, 2013, 12:14:11 PM »
trying to test dryer Gas Valve coils with a multitester would be inconclusive
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9478
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: $160 hi limit thermostat on ge dryer WTF?
« Reply #41 on: April 09, 2013, 12:47:09 PM »
Hmm, Gas Valve Coil... for some reason I thought you had been talking about the heating element.

Anyway this topic has gotten way off topic. Please start a new topic with any further questions you have.

Thanks,
Hope you find our site helpful.

 

LG DLG3744U dryer keeps tripping the high-limit thermostat

Started by tikijack

Replies: 1
Views: 285
Last post September 10, 2014, 07:55:46 PM
by domain
LG gas dryer: constantly tripping the manual-reset thermostat

Started by jemenake

Replies: 5
Views: 9697
Last post July 30, 2008, 12:19:47 AM
by RegUS_PatOff
LG gas dryer: constantly tripping the manual-reset thermostat

Started by racebug68

Replies: 2
Views: 3904
Last post January 22, 2009, 12:51:37 PM
by RegUS_PatOff
Dryer Not Heating - Thermostat continuously tripping

Started by JonG

Replies: 3
Views: 3543
Last post June 22, 2009, 02:59:36 PM
by RegUS_PatOff
LA-1053 Maytag Dryer Thermostat Kit

Started by AJ

Replies: 0
Views: 2767
Last post May 03, 2009, 09:48:57 AM
by AJ
Maytag Dryer not getting hot ENOUGH, new thermostat installed

Started by Shotgun

Replies: 28
Views: 15749
Last post March 19, 2010, 10:03:48 AM
by RegUS_PatOff