Kitchen aide d/w

[All Brand]

Have mod KUDG25SHBT1 Need to chg soap disp  Is there a trick to get the inner panel apart from the the outer door?Does the vent cap have to be removed? This one not moving  and it a NLA part thru marcone? thanks Dave

[bigbuck]

Should not need to remove air vent off, remove four torx screws from inside door , should come right off.

[tgoods]

You do need to remove the vent cap to remove the inner panel. If I remember right you have to turn it clockwise about 1/6th turn to remove.

[bigbuck]

On this model , you just have to remove the 2 number 2 screws out in diagram & panel slides down & out, no need to remove air vent.

[All Brand]

Thanks once again guys .Big buck yours was thecorrect answer. Thxs again

[tgoods]

I mistook it for a different model.  Glad you got it done.