Have an LG DLEX2501 Electric:
Symptoms: 4-5 cycles needed to dry clothes, changing heat level on front has no effect. Timed dry has no effect.
So far: cleared all lint.
Both heaters come on in service mode (can dry clothes in ~ 45mns in service mode).
Moisture sensor working ok: checked continuity of harness by shorting pins 2&6 (0.3ohm) and in service mode, the moisture sensor reads 250-255 empty and quickly drops to 30 when damp cloth placed across it.
So heating element must be ok, and thermistor is listed as "not common". Is this simply the controller? Next step?
These come up in service mode, could not find info on any:
Although "E5" is listed later on in the service manual (after pressing start/pause 4times), this came up with the other two. The pump test appeared successful: started at 130 and then dropped to 27.