Ok got into Self Test Diagnostics: Here is what I found.
Step 1. Configure User Interface - this test OK.
Step 2. Error Codes - E12 Registered on the Display which said E12 Drum Motor -Description was: Motor is not rotating properly or centrifugal switch is bad. Please check. (So I removed motor and opened up the switch to see if I had any burnt contacts, removed every contact pin and cleaned up contacts just to be sure and found really nothing burnt). Reinstalled motor, cleared the motor error code and retested the motor thru Diagnostics - Motor worked FINE thru the Diagnostics with NO ERRORS.
Step 3. Checked Outlet Thermistor - Machine displays out thermistor temperature then when you hit the enter button the Drum is suppose to tumble and change directions every 30 seconds. Well the Drum tumbles but DOES NOT CHANGE DIRECTION like it is suppose to
Step 4. Checked Inlet Thermistor - everything checkout perfect here and this test displays thermistor temperature then when you hit the enter button the Drum is suppose to tumble and change direction every 30 seconds - It actually stops and DOES changes directions like it is suppose to. Work perfectly on this cycle!
Step 5. Checked Moisture Sensor - This worked perfectly - no issues here.
Step 6. Checked Blower/Exhaust - Blower turns on and UI displays rpm. Well the Blower motor turns on BUT THE UI WILL NOT DISPLAY THE TRUE RPM's like it's suppose to
Step 7. Checked Dryer Rack - Displays Dryer rack temperature - no issues here either.
I have two issues now, but none are showing up in the diagnostics error codes. One being no RPM's being shown on Blower Exhaust and the INLET Thermistor does not reverse drum directions when in Diagnostics.
The weird thing now is I'll exit the program and try to run the Dryer in normal mode and run the Dryer and the minute I unplug the unit and let it sit for 30 seconds, I plug it back in to run the dryer normally the Dryer will shut down after 6 seconds after I hit the enter button. NO ERRORS REGISTER, THE MOTOR JUST SHUTS DOWN. I CAN'T EVEN GET THE GAS DRYER TO FIRE UP BECAUSE THE MOTOR SHUTS DOWN AFTER 6 SECONDS?
ANY THOUGHTS OUT THERE??? I'm thinking right now Motor Related ?? But would it be Drive motor or Blower motor causing this? BANGING MY HEAD ON THIS ONE.
Any help would be appreciated...