Author Topic: One of 6 burners not igniting. Viking vdsc485  (Read 708 times)

Offline Becker135

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 1
One of 6 burners not igniting. Viking vdsc485
« on: January 20, 2013, 04:02:37 PM »
No spark from one of 6 igniters.  Would I be able to see evidence on the module if this one circuit is bad?  The other burner in line with this one lights, but continues to click after lighting.  The other 4 burners work fine.  One possible issue is that the long ground in the center of the cooktop is disconnected from whatever it is supposed to ground, and I can't locate the spade it plugs onto.  The eyelet is screwed into the back wall.  The ground from both left and right igniters are connected properly, so this may be an unrelated issue.  Any advice is appreciated.


Viking burners not igniting

Started by michaeljc70

Replies: 12
Views: 2857
Last post July 05, 2012, 10:25:50 PM
by JWWebster
2 of 4 top burners not igniting

Started by centralappliance

Replies: 4
Views: 1863
Last post July 28, 2009, 08:35:30 PM
by centralappliance
frigidaire gas stove model ffgf3053lsf burners not igniting on all four

Started by gregaguilar

Replies: 2
Views: 1126
Last post July 30, 2013, 08:15:43 PM
by afterblast
Viking range - one burner not igniting

Started by michaeljc70

Replies: 5
Views: 1260
Last post August 05, 2013, 04:37:09 PM
by michaeljc70
Removing main top on whirlpool gas range with sealed burners

Started by Vornato

Replies: 1
Views: 9805
Last post December 06, 2007, 07:17:47 AM
by apptech
Viking Dual Fuel Range

Started by TechnicianBrian

Replies: 0
Views: 2542
Last post April 04, 2008, 05:00:21 PM
by TechnicianBrian