Author Topic: GE washer that won't fill all the way in rinse cycle  (Read 7726 times)

Offline Covack

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 3
Re: GE washer that won't fill all the way in rinse cycle
« Reply #10 on: March 08, 2014, 08:09:55 PM »
I found this site on the net, I know this is  almost a year old posting
I ran across this same problem today, I read all the post, leading up to mine
Was the timer the culprit or was the fabric softener in the off position the problem
 thanks, this is a great site. O0
                                         

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 417
  • Country: us
Re: GE washer that won't fill all the way in rinse cycle
« Reply #11 on: March 08, 2014, 08:49:25 PM »

  What is your washer model number?

Eric

Offline Covack

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 3
Re: GE washer that won't fill all the way in rinse cycle
« Reply #12 on: March 08, 2014, 08:53:14 PM »
GTWN3000M2WS
It is a friends washer, I was checking

Offline fairbank56

  • Technician
  • Member Since: Aug 2012
  • Posts: 417
  • Country: us
Re: GE washer that won't fill all the way in rinse cycle
« Reply #13 on: March 08, 2014, 09:30:53 PM »

  When washer is in wash fill, the timer does not advance while filling, fill level is determined by setting of level control (pressure switch). Same applies in rinse with fabric softener switch on. With fabric softener switch off, power is applied to timer motor while filling and fill level is determined by timer, not pressure switch and this is why you get low level fill.

Eric

Offline Covack

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 3
Re: GE washer that won't fill all the way in rinse cycle
« Reply #14 on: March 08, 2014, 09:34:40 PM »
thanks, I was going to order a timer, I didn't check the fabric softener switch

I will the call the Lady, get her to check the switch deal
   
                  thanks  :thanks:

Offline olyteddy

  • Technician
  • Member Since: Jul 2012
  • Posts: 195
  • Country: us
Re: GE washer that won't fill all the way in rinse cycle
« Reply #15 on: March 09, 2014, 03:32:24 AM »
It's a gubment conspiracy. They (GE) does that to keep the machine 'Green'. Do not adjust your set...We control the vertical...We control the horizontal... :D The EPA controls the water level...:rofl: Leave it in 'Fabric Softener mode'...

 

PAV3200AWW Washer is stopping when it get s to rinse cycle

Started by mondoman

Replies: 1
Views: 2491
Last post December 16, 2007, 12:11:43 PM
by apptech
frigidaire washer smoking and only spins on rinse cycle

Started by jazzly

Replies: 3
Views: 3751
Last post November 09, 2008, 09:51:21 AM
by Repair-man
Sears Kenmore HD80 Series Washer Skipping Rinse Cycle

Started by rljulian

Replies: 2
Views: 4302
Last post January 14, 2009, 08:07:55 AM
by Mr. Fix-It
Whirlpool washer - will not fill after spin cycle, starts agitating without wate

Started by tomaszkr

Replies: 7
Views: 4780
Last post January 18, 2009, 06:01:17 PM
by JWWebster
Whirlpool Commercial Washer only fills 1/2 way or less or rinse cycle

Started by bsponge

Replies: 1
Views: 2197
Last post February 24, 2010, 12:49:23 PM
by JWWebster
Maytag A183 washer drains during Spin cycle fill

Started by Louis

Replies: 2
Views: 2440
Last post August 28, 2010, 01:26:03 PM
by JWWebster