Author Topic: Remove control board  (Read 875 times)

Offline sloth

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 4
Remove control board
« on: January 16, 2013, 07:46:24 PM »
Can anyone tell me how to get the control panel off in order to remove the control board from a GBD307PRB01 built in double oven?  I already removed the trim pieces from the sides and the other directions i have read online says to remove the 2 side screws from the control panel, which on my unit are not screwed into anything, and then the control panel will come off.  Any help would be appreciated
thanks

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Remove control board
« Reply #1 on: January 16, 2013, 07:53:58 PM »
Hi,

GBD307PRB01 Diagrams

There is this service manual should be similar to your model.
8178007 KR-30 Whirlpool Electric Built-In Double Oven Service Manual


Hope it helps.

Let us know how it goes or if you have any other questions.
Hope you find our site helpful.

Offline sloth

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 4
Re: Remove control board
« Reply #2 on: January 16, 2013, 08:12:15 PM »
Thanks for the PM/service manual.  I had seen the steps outlined in that manual elsewhere and they do not seem to apply to my oven.  I have included some photos of my oven.  Thanks again

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Remove control board
« Reply #3 on: January 16, 2013, 08:19:48 PM »
I see in your photo the oven looks like it's still screwed to the cabinet.

The control panel maybe just to tight up against the cabinet.

I would remove the screws that hold the oven to the cabinet so you can pull the oven out away from the wall about a 1/4 inch or so.
That will give you some wiggle room with the control panel.

What is wrong with the oven that you are changing the control board?

Hope you find our site helpful.

Offline sloth

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 4
Re: Remove control board
« Reply #4 on: January 16, 2013, 08:22:21 PM »
The problem with the oven is that the display shows nothing.  When you push the upper oven (or lower oven) button and then start it just beeps and does not start.  If you hit the light button then the light turns on, but any other function except for the timer results in consecutive beeps.
thanks

Offline sloth

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 4
Re: Remove control board
« Reply #5 on: January 16, 2013, 08:42:34 PM »
I see how to get the control panel off now, after moving the oven out 1/2 inch there are 2 screws on either side that need to be taken out, even with those out the wires are pretty taught...I will probably just let a professional deal with this.
Thanks again for the assistance.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Remove control board
« Reply #6 on: January 16, 2013, 08:45:53 PM »
No problem,  O0
Hope you find our site helpful.

 

8302967 Whirlpool Oven Range Clock Control Board

Started by AJ

Replies: 0
Views: 6653
Last post March 12, 2009, 09:43:18 PM
by AJ
74006613 Maytag Jenn Air Range Oven Relay Control Board

Started by AJ

Replies: 0
Views: 5518
Last post April 08, 2009, 05:24:13 AM
by AJ
WB27T10190 GE Range Oven Control Board ERC Kit

Started by AJ

Replies: 0
Views: 4553
Last post April 15, 2009, 03:32:18 PM
by AJ
74009213 Maytag Amana Oven Range Clock Oven Control Board

Started by AJ

Replies: 0
Views: 3851
Last post April 21, 2009, 10:02:56 AM
by AJ
9782435 KitchenAid Oven Range Microcomputer Control Board

Started by AJ

Replies: 0
Views: 4795
Last post June 04, 2009, 08:54:33 AM
by AJ
9757476 Whirlpool Oven Clock Control Board

Started by AJ

Replies: 0
Views: 3746
Last post June 10, 2009, 01:37:52 PM
by AJ