Remove control board

[sloth]

Can anyone tell me how to get the control panel off in order to remove the control board from a GBD307PRB01 built in double oven?  I already removed the trim pieces from the sides and the other directions i have read online says to remove the 2 side screws from the control panel, which on my unit are not screwed into anything, and then the control panel will come off.  Any help would be appreciated
thanks

[AJ]

Hi,

GBD307PRB01 Diagrams

There is this service manual should be similar to your model.
8178007 KR-30 Whirlpool Electric Built-In Double Oven Service Manual


Hope it helps.

Let us know how it goes or if you have any other questions.

[sloth]

Thanks for the PM/service manual.  I had seen the steps outlined in that manual elsewhere and they do not seem to apply to my oven.  I have included some photos of my oven.  Thanks again

[AJ]

I see in your photo the oven looks like it's still screwed to the cabinet.

The control panel maybe just to tight up against the cabinet.

I would remove the screws that hold the oven to the cabinet so you can pull the oven out away from the wall about a 1/4 inch or so.
That will give you some wiggle room with the control panel.

What is wrong with the oven that you are changing the control board?

[sloth]

The problem with the oven is that the display shows nothing.  When you push the upper oven (or lower oven) button and then start it just beeps and does not start.  If you hit the light button then the light turns on, but any other function except for the timer results in consecutive beeps.
thanks

[sloth]

I see how to get the control panel off now, after moving the oven out 1/2 inch there are 2 screws on either side that need to be taken out, even with those out the wires are pretty taught...I will probably just let a professional deal with this.
Thanks again for the assistance.

[AJ]

No problem,