Author Topic: Two dryers that used to work now do not  (Read 2217 times)

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Two dryers that used to work now do not
« on: January 16, 2013, 10:22:46 AM »
I have a Maytag Neptune MDE3000 and a frigidaire fde7976fs0 dryers that will not start. Both worked recently but have stopped. On both dryers I have checked the following: start switch, door switch and the thermal fuses, all show to be working properly. No sound from either when the start button is pressed.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 661
  • Country: us
Re: Two dryers that used to work now do not
« Reply #1 on: January 16, 2013, 11:27:13 AM »
I always start by checking voltage at the outlet and check the cord where it attaches to the dryer. This is where the wiring diagram comes in handy. You will need to follow the circuit to the motor, checking for voltage or continuity through each component. Sounds like you have done the right things so far.

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Re: Two dryers that used to work now do not
« Reply #2 on: January 16, 2013, 12:18:33 PM »
I have checked the voltage on both at the terminal box, shows 220v. Do I need to check for voltage or continuity from the box to the motor?

Thanks for the help.

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Re: Two dryers that used to work now do not
« Reply #3 on: January 16, 2013, 12:20:44 PM »
How do I  check if the motor(s) are good?

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Re: Two dryers that used to work now do not
« Reply #4 on: January 16, 2013, 04:50:19 PM »
motor shows 120v between blue 28 and ground.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Two dryers that used to work now do not
« Reply #5 on: January 16, 2013, 05:42:39 PM »
motor shows 120v between blue 28 and ground.

On what dryer?
Hope you find our website helpful.

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Re: Two dryers that used to work now do not
« Reply #6 on: January 16, 2013, 07:15:16 PM »
maytag

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Two dryers that used to work now do not
« Reply #7 on: January 16, 2013, 07:33:05 PM »
maytag

You should have power to the gray and red wires on the motor wire harness.

Most of the time if you have the correct voltage to a dryer and the motor does not run it's because of a bad thermal fuse or door switch.
Many times if the motor is bad it will still growl, hum or start hard, but you can tell it's getting voltage.

You can check the door switch and thermal fuse for continuity with a multimeter to see if they are good or not.

The MDE3000 uses thermal fuse part # 33001762.

Here is a video that will show you how to check the thermal fuse.
Thermal Fuse Help Video

Let us know what you find or if you have any other questions.
Hope you find our website helpful.

Offline richard dicarlo

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 15
Re: Two dryers that used to work now do not
« Reply #8 on: January 16, 2013, 08:54:42 PM »
I've checked both thermal fuses and the door switch, they all show connectivity. No sound, nothing happens on either dryer when the start button is pressed.
voltages:
Color-Number(Position on harness)
Grey-51(4) to Red-31(5) voltage = 0 with the door open and closed or start button
Red31(5) to Blue28(2) voltage = 121V door open and closed or start button
Yellow35(6) to Blue28(2) voltage = 65V door open, 124v door closed
blue28(2) to black32/33(1) voltage  = 124v door open or closed.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9589
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Two dryers that used to work now do not
« Reply #9 on: January 16, 2013, 09:06:46 PM »
I have attached the wiring diagram I'm looking at for your Maytag MDE3000.

Would like to see what some other techs think of your voltage readings.
Hope you find our website helpful.

 

Dryers, not just for drying cloths anymore...

Started by AJ

Replies: 0
Views: 1715
Last post November 03, 2007, 09:58:32 AM
by AJ
General Electric Recalls Gas Dryers Due to Shock Hazard

Started by AJ

Replies: 2
Views: 2416
Last post February 12, 2008, 05:32:59 PM
by whirlpooltech
Electric Dryers - 3 and 4 wire options.

Started by AJ

Replies: 0
Views: 1323
Last post May 05, 2008, 12:36:43 PM
by AJ
Miele Recalls Gas Dryers Due to Risk of Gas Leak or Fire

Started by AJ

Replies: 0
Views: 1697
Last post May 30, 2008, 07:42:58 AM
by AJ
16008714 1994-1997 Maytag Dryers Service Repair Manual

Started by AJ

Replies: 0
Views: 3609
Last post August 13, 2008, 05:24:04 PM
by AJ
Whirlpool Tumble Dryers

Started by Penguin45

Replies: 2
Views: 1439
Last post November 22, 2008, 01:33:23 PM
by Penguin45