Forum > Dryer Repair

Two dryers that used to work now do not

<< < (4/4)

JWWebster:
I always check various components with power disconnected and remove wires from each component to prevent a GHOST feed.

richard dicarlo:
removed the wire harness from motor and checked for continuity between the posts 5(red 31) and 4(grey 51) on the motor shows no connection.  Does this mean dead motor?

theoldstoveguy:
Yes bad motor.

richard dicarlo:
 :( that's what I was afraid of.
Thank you to everyone that helped.  :thanks:
Now I have to find out what is wrong with the other dryer, hopefully not the same thing.

theoldstoveguy:
Y302278 is part number for the motor.

Navigation

[0] Message Index

[*] Previous page