Author Topic: Samsung DMT800RHS/XAA Fixes  (Read 2741 times)

Offline GUnderhill

  • VIP Member
  • Member Since: Jan 2013
  • Posts: 3
Samsung DMT800RHS/XAA Fixes
« on: January 10, 2013, 12:42:59 PM »
 
Hello Fellow Fixers,

I've had a Samsung DMT800RHS/XAA dishwasher for almost 2 years.  I thought I would post my solution to one problem that has cropped up with this machine in hopes that someone with the same problem could benefit.

The first problem is  the upper rack adjusters.  Two months after installation the machine would fill with water, but not start the wash cycle.  It would drain, but not wash.  Since it was under warranty Samsung sent a tech to have a look.  The tech had seen this same problem before with this machine.  Sure enough he was correct.  The poorly designed and tested upper rack adjusters have small plastic tabs that attach the rack to the adjusters.  The tabs quickly weaken, break off, and find their way down to the impeller and keep the motor from turning.  Two new adjusters were ordered and installed.  The new pair lasted about 6 months, and the third pair about the same.  My solution (although not elegant) is to use one cable tie on the lower section of each adjuster, wrapping it around the wire portion of the rack.  As you can see from the photo, the third pair of adjusters had started to fail when I made this repair.  So far I have not had any more trouble with the adjusters.  I broke off the tabs that were already showing signs of fatigue to avoid having to retrieve them from the impeller.

I hope this helps someone with the same problem.

Happy fixing,

G. Underhill
« Last Edit: January 10, 2013, 12:44:02 PM by GUnderhill »

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9228
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Samsung DMT800RHS/XAA Fixes
« Reply #1 on: January 10, 2013, 07:41:04 PM »
Nice, thanks for posting.  O0

Offline SpeedRacer

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 1
Re: Samsung DMT800RHS/XAA Fixes
« Reply #2 on: October 21, 2013, 11:29:32 AM »
Sorry to bring up an old topic, however, I think the topic starter deserves some praise. I've had this exact same problem and wanted to thank you for providing a great solution.  :thanks:

Offline jaminjo

  • VIP Member
  • Member Since: Dec 2013
  • Posts: 2
Re: Samsung DMT800RHS/XAA Fixes
« Reply #3 on: December 10, 2013, 08:35:29 PM »
Hi GUnderhill,
I have a similiar problem in that the unit drains then won't continue. I guess something else (brackets are still ok) is in the motor because it won't turn on. Can I start taking out screws on the bottom cover, will that take me to the motor? (see whats in the motor)
Thanks
joe

Offline jaminjo

  • VIP Member
  • Member Since: Dec 2013
  • Posts: 2
Re: Samsung DMT800RHS/XAA Fixes
« Reply #4 on: December 10, 2013, 09:13:42 PM »
Ahhh GUnderhill,
I took off some screws and then some more and found this is the motor!
Thanks a lot, You saved me a bundle!

Offline patrickg450

  • VIP Member
  • Member Since: Mar 2014
  • Posts: 2
Re: Samsung DMT800RHS/XAA Fixes
« Reply #5 on: March 08, 2014, 06:13:42 PM »
Ours is over 14 months old, top rack adjuster are still in tack.  Might have been fixed, maybe we are just lucky.........

Offline myflybox

  • VIP Member
  • Member Since: Jul 2014
  • Posts: 1
Re: Samsung DMT800RHS/XAA Fixes
« Reply #6 on: July 01, 2014, 11:13:46 PM »
Bump this to the top.

The hint about the washer draining and then not starting the wash cycle yet not indicating a code led me to look under the grate to find a little tab that broke and was jamming the motor. Another one for the DIY.

Thanks for contributing to the greater good

 

Samsung DMT800RHS-XAA

Started by Patricio

Replies: 3
Views: 1650
Last post November 02, 2012, 08:37:02 PM
by Patricio
Samsung DMT800RHS/XAA Fix

Started by GUnderhill

Replies: 1
Views: 1026
Last post January 10, 2013, 01:19:00 PM
by domain
Samsung dishwasher DMT800RHS/XAA

Started by Patricio

Replies: 0
Views: 1439
Last post January 25, 2013, 08:00:28 PM
by Patricio
Samsung DMT800RHS - control board power

Started by painedavid

Replies: 2
Views: 636
Last post November 03, 2013, 10:05:52 PM
by painedavid
Samsung - DMT800RHS - How to access drain pump?

Started by PacoDeGato

Replies: 15
Views: 1477
Last post March 09, 2014, 09:45:46 AM
by patrickg450
samsung dishwasher dmt800rhs errors

Started by meatgrinder

Replies: 9
Views: 942
Last post March 20, 2014, 08:59:53 PM
by afterblast