Author Topic: MODEL MVWX700XW SHIFTER WIRE HARNESS  (Read 607 times)

Offline gregaguilar

  • Technician
  • Member Since: Jan 2012
  • Posts: 92
MODEL MVWX700XW SHIFTER WIRE HARNESS
« on: January 09, 2013, 08:39:14 PM »
 I DIAGNOSED WASHER SHIFTER TO BE OUT AND WHEN I WENT TOO REPLACE IT WITH A NEW ONE FOUND WIRE HARNESS HAD TWO WIRED BROKEN  QUESTION IS  IS THERE ANY WAY TO REPAIR THIS END OF HARNESS WITHOUT HAVING TO BUY THE WHOLE HARNESS.?

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1475
  • Country: us
    • Buy me a beer through paypal
Re: MODEL MVWX700XW SHIFTER WIRE HARNESS
« Reply #1 on: January 09, 2013, 08:53:23 PM »
Where did it break, at the molex plug?  You can pop the terminal out of the plug, solder the wire to it and snap it back in.  I did that with broken wire on the motor capacitor on one of these.  It was a snap together plug so it was easy to get the terminal out.  Make sure you have good strain relief on the wires so it doesn't break again.

donate
$1, $2, $5, $10, $20, $50
 

8183259 wire harness connection photo view

Started by nafraz

Replies: 10
Views: 488
Last post March 16, 2014, 07:38:09 PM
by AJ
Maytag Washer Model mav7600aww, noisy

Started by dex

Replies: 1
Views: 4371
Last post October 31, 2007, 05:50:56 PM
by rickgburton
Maytag Atlantis Model (MAV9501EWW) Will Not Start

Started by mngambas

Replies: 8
Views: 6235
Last post November 01, 2007, 11:42:28 AM
by mngambas
Replacing Front Load Washer Pump Model#LHW0050PQ

Started by resapp

Replies: 4
Views: 2318
Last post May 22, 2012, 12:34:13 PM
by AJ
whirlpool washer model LXR9245EQ1- won't drain-slow spin

Started by fixmeplz

Replies: 2
Views: 5947
Last post January 16, 2008, 10:13:02 PM
by JWWebster
whirlpool washer model LSR9434PQ0 won't agitate or spin

Started by jhuffman

Replies: 4
Views: 2093
Last post May 28, 2012, 06:16:50 PM
by JWWebster