Author Topic: service manual for Maytag Neptune MAH5500BWW  (Read 3929 times)

Offline jryder

  • VIP Member
  • Member Since: Feb 2009
  • Posts: 3
  • Country: us
service manual for Maytag Neptune MAH5500BWW
« on: January 06, 2013, 12:11:46 PM »
Does anyone have a link to a service manual for a maytag mah5500bww washer, I was unable to locate one in the download section.  Washer making some squeaking and possible bearing noise durning spin cycle. Time to tear into it.
 
 
jryder
residential hvac tech since 1983

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9378
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: service manual for Maytag Neptune MAH5500BWW
« Reply #1 on: January 06, 2013, 12:23:04 PM »
Hi,

The closest thing you will find is the service manual for the MAH3000 and MAH4000.

We have a copy of that service manual in our store at this URL.
http://appliancejunk.com/forums/index.php?action=store;sa=view;id=92

But being you started a new topic in our forum to share what was wrong with your washer I sent you a free copy via PM.

The squeaking noise could be the drive belt and simply installing a new belt would solve that problem.

If you can spin the basket by hand and it sounds rough or noisy then you probably have bearing problems.

Remove the access panel at the rear of the washer and look under the drive pulley on the back of the tub to see if it's clean looking yet or if it has a water/grease trail running down the tub.

Let us know what you find or if you have any other questions.

Thanks for posting.
Hope you find our site helpful.

Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 889
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: service manual for Maytag Neptune MAH5500BWW
« Reply #2 on: January 09, 2013, 01:02:04 AM »
I have a hard copy of the manual (no PDF) I got from a school.  However,  The noise your hearing is most likely bearing noise in spin.   I have worked on a ton of these.    I have to tell you for the age of this machine,  I usually junk them.    I had one today that went through a power failure,  and the touch panel was shorted.   I reached in,  lifted the inner tub and it had a 1/4 inch of play.    Bad bearings too.   Hard to get people to put that much money into that old of a machine.   
Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 636
  • Country: us
Re: service manual for Maytag Neptune MAH5500BWW
« Reply #3 on: January 09, 2013, 09:34:00 AM »
I have put bearings and seals in several of these. It is not something I do in the customers house. The inner bearing gets rusted in place and requires a big hammer to get it out. I take it to my shop and work on it in the evenings. Just make sure to quote a price that will make a profit for the extra time and effort.












 

16010061 Maytag Neptune Washer Service Manual

Started by AJ

Replies: 0
Views: 5853
Last post March 17, 2008, 01:00:09 PM
by AJ
16022808 Maytag Top Load Neptune Washer Service Repair Manual

Started by AJ

Replies: 0
Views: 3887
Last post April 24, 2008, 05:04:08 PM
by AJ
need service manual: Maytag mah5500bww

Started by rudyh

Replies: 2
Views: 1482
Last post March 26, 2012, 07:17:40 PM
by bigbuck
16023083 Maytag Performa Washers Service Manual

Started by whirlpooltech

Replies: 0
Views: 4829
Last post March 22, 2008, 07:54:25 PM
by whirlpooltech
16010373 Maytag Dependable Care Washer Service Manual

Started by whirlpooltech

Replies: 5
Views: 10481
Last post March 02, 2011, 12:38:31 AM
by klhglobal
16007803 Maytag Front Load Washer Service Repair Manual

Started by AJ

Replies: 0
Views: 4528
Last post March 27, 2008, 08:23:12 PM
by AJ