Author Topic: Kitchenaid (whirlpool) drop in elec range selector switch arcing M#KEDT105SBL1  (Read 844 times)

Offline andersenappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 685
  • Country: us
This part #3148119 is NLA. A couple of places on the web say they have it as special order, but the price seems too cheap.

The thing arced and definitely fried.  It continues to arc and kill the breaker when you try to reset it.  The arcing is from a large red cable, to a black cable that is hooked up to a three-prong male connector w/other wires (I don't remember color).  It is so bad that the red wire connector is almost melted completely away.  I can't get into the switch as of yet to see what is happening inside.

My question is this: Does this arcing (outside the switch body) indicate a switch problem, or could this be caused by a wiring harness or other issue?  Seems odd that it'd arc from one connector to another, outside the switch body.

Any ideas?

Anybody have a wiring diagram / manual? 

My guess is that this'll be condemned, but I'd like to know a bit more about it.

Offline andersenappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 685
  • Country: us
Another consideration is that the customer would like to preserve this for a while.  If the cooktop could be made available, then they could use the wall oven for baking. 

Without a wiring diagram, I wouldn't want to mess around trying to save it.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
I also looked for the switch and did not have any luck.
I have attached a copy of the tech sheet.
Hope you find our site helpful.

Offline andersenappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 685
  • Country: us
Sweet!!  :thanks:

 

Whirlpool drop in electic range temp. problems

Started by thackeray4

Replies: 3
Views: 1890
Last post November 23, 2008, 01:20:36 PM
by AJ
KAC-19 KitchenAid Vision II Drop-In Range Service Manual

Started by AJ

Replies: 0
Views: 810
Last post August 18, 2009, 03:46:23 PM
by AJ
Whirlpool / Kenmore Range Membrane Switch - New parts defective

Started by whjeffs

Replies: 0
Views: 67
Last post October 13, 2014, 05:39:53 AM
by whjeffs
Removing main top on whirlpool gas range with sealed burners

Started by Vornato

Replies: 1
Views: 8738
Last post December 06, 2007, 07:17:47 AM
by apptech
Whirlpool Range - Top Burner Not Working

Started by AJ

Replies: 0
Views: 4061
Last post December 28, 2007, 12:21:08 AM
by AJ
Whirlpool Electric Range - Bake Cycle Not Working

Started by AJ

Replies: 0
Views: 3658
Last post January 01, 2008, 03:44:30 PM
by AJ