Yes, the voltage to your dryer is fine.
These are for sure all ok too.
Heating element resistance 8.5 ohms
Thermistor resistance 10.2k ohms
Thermal cutoff 0 ohms
Thermal fuse 0 ohms
It would not be uncommon at all on this model for a faulty control board to cause a no heat problem.
Your model uses control board part # 8546219
Not a cheap part, but if you order it from the part number link I posted above and it does not solve the problem you can return it.
I replaced a few of them control boards myself in 2012 for no heat problems and I would bet it's also the same problem you are seeing.