Forum > Dryer Repair

No heat Samsung DV218AEW/XAA

(1/2) > >>

stevetanaka:
My dryer now has no heat.  There are no error codes, all modes of drying seem to mechanically work, but there is no heat to any mode.  I have cleaned out the venting system as much as I can and have verified that the two metal sensing strips are clean (have not checked the interior of the sensors).

What would you recommend?

AJ:
Hi,

I would check the heating element, part # DC47-00019A

dab147315:
MAKE SURE YOU HAVE 23O VOLTS TO BACK OF DRYER FIRST.

stevetanaka:
The power is good to the dryer and to all modes.  I'm not sure how to check the heating element-- how do I do that?

AJ:
To test the heating element you would check it for continuity with a multimeter as shown in the video below.


Navigation

[0] Message Index

[#] Next page

Go to full version