BoardRestored.com - Discontinued Control Board Repair
If the optics were bad you would that get ice at all.Maybe put it all back together and see what happens tomorrow afternoon.
Pull refrigerator out and on the picture i sent you number# 13 part is a fast disconnect.This is the tube that lets water in ice maker by that black grommet on freezer ceiling.Push down on it and it will come off.Then see if you can blow threw there to check for ice blockage.If you can't that black grommet is frozen.Next if you know how to make a cheater cord to apply 120 volts to the solenoid on the water valve that has the smaller tubing and connects to that# 13 part This will let water flow in the unconnected disconnect #13 part.Of course up plug refrigerator using cheater cord.If you have no water the valve is bad if the dispenser works.Whats left is icemaker or optic .Most of time its the icemaker if water valve is good Use manual J.W sent to find out.
Started by bpelles
Started by scooter88
Started by jade7597
Started by deadeye
Started by 2kcloudy
Started by Jearls2