The ice maker on my whirlpool ED22TEXHW00 is not working. When I jump T and H, it runs through a complete cycle, but water does not come out of the fill tube at the end of the cycle. But, when I jump V and L, water does come out of the fill tube. If I pour water in manually, water freezes, auger spins, heat coil heats, ice pops out. But no water out the full tube. I would think it was a bad water valve, but water comes out just fine when I jump V and L. I thought maybe low pressure/bad filter, but same thing happens with the filter removed. I thought the IM module might be bad, so I replaced the entire ice maker assembly, but it's still doing the same thing!