Get Answers to your Appliance Repair Questions

Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Need help w/wiring oven control switch, Roper FEP310VQ  (Read 2525 times)

Offline mcnairent1

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 1
Need help w/wiring oven control switch, Roper FEP310VQ
« on: November 26, 2012, 08:37:00 PM »

switch shorted out two lower wires on both sides of control switch.  Got new switch but don't know exact placement of wires on lower part of both sides of switch.  Right side has 3 wires, a black, (upper) which didn't burn and is in correct place, and two on bottom that shorted out, a red and a black.  Which goes where?  On left side, there are six wires - four were not burned out, so have them correct, but bottom two have question about.  One is red w/white streak, the other is black (I think).  Which goes where?

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10836
  • Country: us
    • - Appliance Repair
Re: Need help w/wiring oven control switch, Roper FEP310VQ
« Reply #1 on: November 26, 2012, 08:47:08 PM »
The wiring diagram should help you figure it out. I have attached a copy to this post.
Look it over and let us know how it goes or if you have any other questions.

Thanks for posting...


8300427 Whirlpool Oven Control Pannel Assy. w/Membrane Switch

Started by AJ

Replies: 0
Views: 5265
Last post April 10, 2009, 12:19:50 PM
by AJ
8300441 Whirlpool Oven Control panel assy w/membrane, switch (white)

Started by AJ

Replies: 0
Views: 5964
Last post October 03, 2009, 02:58:45 PM
by AJ
jenn air oven broil switch #704355

Started by jimfish

Replies: 2
Views: 5076
Last post March 14, 2008, 11:28:27 AM
by JWWebster
control panel clock and oven will not work

Started by Pens Fan

Replies: 3
Views: 5390
Last post November 04, 2008, 06:38:02 PM
by Pens Fan
Built in Dbl Oven, Control Panel Zotzed

Started by Tinka

Replies: 5
Views: 7660
Last post November 10, 2008, 08:51:41 PM
by Tinka
Roper Oven

Started by CB

Replies: 1
Views: 8137
Last post November 16, 2008, 04:50:46 AM
by Repair-man