Author Topic: how do you guys make money?  (Read 4365 times)

Offline john63

  • Technician
  • Member Since: Feb 2010
  • Posts: 508
Re: how do you guys make money?
« Reply #10 on: November 28, 2012, 01:37:12 AM »
<<<how do guys make money?>>>

****************

I agree with other members---the "Blue Book" is the way to go. Force yourself to *adopt* it and *use* it.

Keep expanding your knowledge--- unrelentingly.

Don't fret over a few customers that express "shock"at repair estimates.
Most customers will gladly pay a premium for services performed fast and consistently.
Your personal conduct/behavior/professionalism must be at it's very best as well---don't dress/talk/act like a "JoeSixPack"/8th grade drop-out (even if you are those things).

Learn from the REAL pros (I did).
There are 2 distinct groups of techs on most appliance repair forums---and they're best described like this...

Example One:
This tech gets in his/her 2002 Acura TSX and turns on the IPod 5th generation wireless sterio---and drives to the grocery store on a Saturday morning.
Returns home and pours a glass of V8 Splash Tropical drink.
Checks the computer & cellphone for email and text messages.
After that---sits down on the couch and turns on the TV to play Halo 3 for a few hours.

Example Two:
This tech gets in his/her 1984 Oldsmobile Cutlass Supreme and slips in an 8 Track Cassette for tunes while driving to the grocery store on a Saturday afternoon.
Returns home and pours a glass of Perrier Sparkling Mineral Water.
Checks the mailbox for USPS mail and uses post-its on the refrigerator door to leave messages.
After that---sits down on the couch and turns on the TV to play PacMan for a few hours.

Offline Earl Dryer

  • Technician
  • Member Since: May 2008
  • Posts: 166
  • Country: us
Re: how do you guys make money?
« Reply #11 on: November 29, 2012, 07:12:33 AM »
Good comments, John.  Like I said, I don't WANT to do the school stuff anymore, so if I get left behind, it is because it was my choice and that leaves more for the rest of you.
P.S. When I get back from the store, in my '84 Olds, I kick back with that 30 pack I just got and watch football (in B&W) :rofl:

Offline john63

  • Technician
  • Member Since: Feb 2010
  • Posts: 508
Re: how do you guys make money?
« Reply #12 on: November 29, 2012, 11:33:15 AM »
<<<Good comments, John.>>>

******************

Thank you

******************

<<<Like I said, I don't WANT to do the school stuff anymore, so if I get left behind, it is because it was my choice and that leaves more for the rest of you.
P.S. When I get back from the store, in my '84 Olds, I kick back with that 30 pack I just got and watch football (in B&W)>>> 

******************

That reminds me of Charlie Sheen for some reason :)


Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 616
  • Country: us
    • Appliance repair
Re: how do you guys make money?
« Reply #13 on: November 29, 2012, 02:48:26 PM »
I am still new to appliance repair. The calls have been few and far between however I got a call today on a gas stove (Whirlpool SF3000ww1)
I found the gas safety valve to be defective. The supply house found one  in another state which means adding S&H. I  qoute them retail 91.00 plus my time and S&H WHich comes to about $175.00. Then I was told that they could buy a used one cheaper.

This is the third time this has happened to me what am I diong wrong? how do guys make money?

That's when I say good, you owe me $69.00, and I'm haulin ass to my next jobs. It all comes to lining up the calls. You sound confident so I think you'll do good with the right advertising. Good luck. O0

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 616
  • Country: us
    • Appliance repair
Re: how do you guys make money?
« Reply #14 on: November 29, 2012, 02:50:59 PM »
Making a living in appliance repair is getting more difficult everyday. There was a news story on msnbc yesterday about 5 thriving and 5 dying industries. Guess which industry was at the top of the list for not thriving. I can certainly understand why, it is almost cheaper to buy a new piece of junk, than is to have the better old one repaired. Look at the age of most of the techs on this board, most of us are in our 50's & 60's and if the young guys can't start out at $60-$70k they ain't workin. :rofl: . Don't know about the rest of you guys but, I'm tired. I don't really want to go to anymore schools to start all over again with the new concepts. Parts & shipping are out of sight, can't afford to order just one part at a time, shipping is sometimes more than the cost of the part. Maybe it's time to retire, again!

Ain't that the truth bro!

Offline jimbo6679

  • VIP Member
  • Member Since: Jun 2010
  • Posts: 109
Re: how do you guys make money?
« Reply #15 on: November 29, 2012, 03:37:52 PM »
Appliances seem to mirror the auto repair business.   Certainly for autos, there are is no more "shade tree mechanic" work on any car newer than 10 or 15 years.   You have to be able to work on the computer/sensor/digital stuff.   More and more of that is moving back to dealerships, because of the specialized training required.\

I see two camps for appliance repair.    Tons of entry level/apartment grade appliances....DW $200, electric range $350, WM $400.     If you get it through the one year warranty, most folks WILL think twice about spending half the cost or more for repair.     But then you have the $1100 WM, $1250 range, $1800 refrig.    Folks will opt to repair these, but the tech needs a lot more skill and training.

Offline donsabol

  • Technician
  • Member Since: Dec 2011
  • Posts: 75
Re: how do you guys make money?
« Reply #16 on: November 30, 2012, 04:41:04 PM »
I been doing service  for 25  years this industry  has changed soo  much since i started.  Remember  when  the service call  was19.95  now we charge 85.00... the technology  has changed people now spend 2000.00  on a refrigerator  you think their gonna shit can it for 300.00    i  think not.  If you  can fix it  and save em the trouble  of shopping  for a new one.  Just provide professional  services..  be  honest.  Dont b.s.  take care of business and the business will take care of you...

Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 979
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: how do you guys make money?
« Reply #17 on: December 01, 2012, 04:04:44 AM »
     I think that you guys giveth up too soon.    I've been in the repair business for almost 40 years.   It's all I've ever done.    Right now,  I'm so busy I could probably afford to hire 2 guys if I could find them.   You have to market yourself, be honest and don't lie to customers and give them your best.  Rewards will come to you.   I keep up with everything.    I fix belt drive whirlpool washers as well as Cabrio's, VMW's,  all front loaders.   When I came into business,  we had the Frigidare roller washer with the pump action agitator.   That was as tough to work on as anything they can come up with now.   Old Norge washers,  etc.  The Speed Queen fluid drive washers.    I went through all of the new appliances and whenever a new things comes along,  you go through a learning curve and then you can fix it.   Point is, keep learning,  it keeps you young.     Keep the customer happy,  and you will get good word of mouth and plenty of service calls.   

     And most of all,  Sell the job guys.    When a customer is wavering over whether to fix or buy new,   give them the proper advise.   I  work on a lot of old stoves,  washers, dryers, etc.    Sell them on the fact the older appliances are BETTER than the new Hi efficiency machines.     Which is true.    Advise them that while a new washer, dryer, stove,  whatever has more electronics and while it may save them penny's when they run them,  it will cost them much more to fix.  And they break down far more often.   

      I had a woman call me on a 2 belt maytag washer, was going to throw it out.   I convinced her it was better to fix and put in the stem/seal kit and bearings than buy new.     She fixed it.   Had I just stood there and said nothing,  she would have junked it.   I SOLD THE JOB>   Plus she would have to pay to deliver,  remove,  and shop for new one.    SELL IT.   Don't be shy.   

      It could be my area,   but most of my customers want me to fix,  buying new or used isn't their first thought.    I put in alot of ERC's,  dishwasher motors,  washer motors,  etc.    I am loaded with work,  so it is possible.   Don't give up,  keep a positive attitude.    Even if a customer wants to buy new,  get a service call.     If your not making something on your service call or are losing money,  then your not charging enough.    Don't give up.   And don't listen to bullshit articles that this service industry is dying,  as far as I'm concerned it's far from it.     

Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present

Offline schleven

  • Technician
  • Member Since: Nov 2010
  • Posts: 531
  • Country: us
    • www.katy-appliance-repair.com
Re: how do you guys make money?
« Reply #18 on: December 06, 2012, 10:29:08 AM »
        You have to market yourself, be honest and don't lie to customers and give them your best.  Rewards will come to you.

I agree.  There are plenty of customers willing to pay for good, honest, reliable service.
"It's not what happens to you, it's what you do about it"

Offline Wedgeman55

  • Technician
  • Member Since: Aug 2008
  • Posts: 979
  • Country: us
  • Man vs Appliance - Never give up, Never surrender
Re: how do you guys make money?
« Reply #19 on: January 27, 2013, 02:30:44 AM »
A little update to this topic - I have become a advocate for older machines.    This is what some of you guys have to do.   I convince them to keep their older washers, dryers, refrigerators, ovens.    Had a lady this week,  was going to get new one.    Convinced her to spend 330 rebuilding old maytag with orbital tranny and give it a seal/bearing/belt job.     Convinced another lady today to spend the money to rebuild her Direct Drive (tranny,  coupling,  and dogs).    Talked 1 into a bake and broil ignitor on an oven instead of buying new one.     -   

One word -  SELL    Another word - TRUST - meaning that once your customers trust you,  you can sell them on repairing the old appliances.   I encourage them to check the internet and see what people are saying about the new equipment.   That usually sells them by itself.     I always tell customers the truth,  I never mis-lead them.   If something is rotted,  too expensive or just too old with NLA parts,  I tell them to replace.   Microwaves - replace (except for something really simple).    Ringer washers - repair if possible (kidding).    You get my drift.   

This is how you make money.   Earl,  another thing.   I'm getting old,  but for some reason I don't mind learning new things.      If I get a manual,  with all of the experiences I've had for 40 years,   I can figure anything out.    New machines are not intimidating.   Just something different to figure out.   This Websight that AJ runs is simply in a word - FANTASTIC!     For example,   I've got a pretty good handle on the cabrio's,  the VMW's,   most of the front loaders (except Bosch.   I don't mess with them except for a blocked drain problem. ).   If anything,   people are likely to spend money on a repair if they spent 1200 on machine.    You can make money,  believe me.   For the occasional person who choses new over a repair,   let them.   I have courted the Middle to upscale customers,   and they always want to repair if they can.    I'm making good money.   Don't let the few cheapo's get you down.   
Commercial Laundry repair Tech and Installer  1973 to 1980
Service Manager / Technician Commercial Laundry repair company 1980 to 2002
Refrigeration - HVAC - Boiler School 1974-1976
Electronic School 1978-1979
Self Employed Appliance Repair Company 2002 to present

 

Make some money - Allow users to reward you for your posts.

Started by AJ

Replies: 2
Views: 6150
Last post February 08, 2011, 04:01:02 PM
by JWWebster
Make money online at ApplianceJunk.com

Started by AJ

Replies: 0
Views: 3378
Last post December 08, 2007, 10:39:20 AM
by AJ
How long before Whirlpool ask for bailout money?

Started by apptech

Replies: 0
Views: 1342
Last post February 19, 2009, 09:47:43 PM
by apptech
Money Matters: Energy Star Rebate Program Update

Started by AJ

Replies: 1
Views: 1251
Last post October 30, 2009, 10:17:25 PM
by JWWebster
Will he make it..........

Started by jumptrout51

Replies: 1
Views: 1382
Last post February 13, 2010, 12:08:12 PM
by AJ
They don't make Fluke like the use to?

Started by AJ

Replies: 21
Views: 4996
Last post September 02, 2011, 07:48:40 PM
by AJ