Author Topic: Amana built-in wall oven that some of the touch panel buttons won't work  (Read 4812 times)

Offline tagarman

  • Technician
  • Member Since: Apr 2012
  • Posts: 84
HELP!  I got a Amana electric built-in single wall oven that about half of the touch panel buttons do not work.  The Model No. is AEW4530DDB and the Serial No. is 11250656CR.  I checked the parts break down and found that the black control panel with touch pad is Part No. 74008268 R/B: 5765M471-60 N/L/A.  The electronic control (clock) is Part No. is 74008313.  The wiring sheet inside only shows where the wires connect into the electronic control.  I need to find out how to check out the touch panel ribbon connector at the control.  If anyone knows how to check this out or has a service manual for this model it would greatly help as I have no way to tell what part I will need.  Thanks for any help you can give me!

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Hi,

Here is the service manual.
http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=407

Parts list for model # AEW4530DDB

Control Panel Part # 5765M471-60 NLA

Oven Control Part # 74008313

Check the keypad membrane connection to see if it needs to be cleaned as shown in this topic.
http://appliancejunk.com/forums/index.php?topic=9863.0

Hope that helps.

Let us know what you find or if you have any other questions.
Hope you find our site helpful.

Offline tagarman

  • Technician
  • Member Since: Apr 2012
  • Posts: 84
Thanks for the service manual.  This will help me check out the touch panel & electronic control board.  I'll let you know how I make out.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
 O0
Hope you find our site helpful.

Offline TexMark

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 7
I have a similar problem with my unit but the keypad issue is not intermitent.  I simply have some keys (i.e. Bake, Cancel, 5, 0) which work, and others that do not (i.e. Convect Bake, Clock, Timer, 3, 7).  What is the likelihood that it's my keypad gone bad, or the stacked set of PCBs?  I tried the cleaning of the ribbons as recommended, but no luck on anything new.  I did get numbers off the PCB unit and have found someone with a slightly newer set of PCBs.  Mine are 00n21615422 Rev A and the advertised part is 00n21615422 Rev C.  My date code is 6088 and the advertised part's date code is 9028.  (Are those Julian dates?)  Anyhow, what's your feel as to whether it's worthwile for me to get the PCBs replaced?  Thank you.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
TexMark, what's the model number of your oven?
Hope you find our site helpful.

Offline TexMark

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 7
AEW4530DDB... a Google search on that modelled me to this thread.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
I would replace the control panel first as it's most likely the problem.

If you order the panel from one of our parts affiliates and it does not fix the problem you can always return it.
http://appliancejunk.com/forums/index.php?topic=4745.0
Hope you find our site helpful.

Offline TexMark

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 7
Ouch!  That's what I was afraid the response would be.  The control panel/keypad is nowhere to be found.  Got any suggestions?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Ouch!  That's what I was afraid the response would be.  The control panel/keypad is nowhere to be found.  Got any suggestions?

Sorry about that. I should have known that but was in a bit of a hurry when I posted.

I have had good luck with ebay for parts that are NLA, did not see one listed today but you could put it on your watch list.

You could also start a new topic in our forum asking if anyone happens to have one on hand. Maybe by chance one of the techs that visit our sit will have one for you. It's a long shot, but it won't cost you anything to ask.
Hope you find our site helpful.

Offline TexMark

  • VIP Member
  • Member Since: Nov 2012
  • Posts: 7
Re: Amana built-in wall oven that some of the touch panel buttons won't work
« Reply #10 on: November 27, 2012, 10:46:11 AM »
Thank you, AJ.  I'll put out feelers on the Maytag and Whirlpool boards, unless there is a more appropriate way to get the questions out to both.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Amana built-in wall oven that some of the touch panel buttons won't work
« Reply #11 on: November 27, 2012, 11:01:59 AM »
Thank you, AJ.  I'll put out feelers on the Maytag and Whirlpool boards, unless there is a more appropriate way to get the questions out to both.

One board or the other should be good enough. No reason to double post. Good luck.


Sent from my iPhone using Tapatalk
Hope you find our site helpful.

Offline sperks

  • VIP Member
  • Member Since: Feb 2013
  • Posts: 1
  • Country: us
Re: Amana built-in wall oven that some of the touch panel buttons won't work
« Reply #12 on: February 23, 2013, 12:13:39 PM »
I've been having exactly the same experience as TexMark and was brave enough to take the thing apart and attempt the cleaning of the ribbon. I've searched quite a lot on the Internet for part# 5765M471-60 with no success.

I hate the idea of trashing a perfectly fine 5 year old oven and I've been cooking fairly successfully with "Keep Warm+0"=170, "Bake+0"=350 and "500" for the whole winter, but as spring comes around and we start to think of baking and tackling those finer recipes I'm finally going to have to suck it up and buy another oven that doesn't match our stove.

Are there any last words of wisdom that might help me avoid defeat to the planned obsolescence?

Thanks,
Steve

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1509
  • Country: us
    • Buy me a beer through paypal
Re: Amana built-in wall oven that some of the touch panel buttons won't work
« Reply #13 on: February 24, 2013, 12:53:58 AM »
White, 5765M472-60; Stainless, 5765M474-60; and Bisque, 5765M473-60 are still available. Maybe you can order one and give it a paint job.  Why Whirlpool would discontinue black before bisque, I don't know.

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1321
  • Country: us
    • Buy me a beer through paypal
Re: Amana built-in wall oven that some of the touch panel buttons won't work
« Reply #14 on: February 24, 2013, 11:31:38 AM »
Probably a lot of unused Bisque(didn't sell as many) are just sitting in a warehouse.

 

control panel clock and oven will not work

Started by Pens Fan

Replies: 3
Views: 3222
Last post November 04, 2008, 06:38:02 PM
by Pens Fan
Built in Dbl Oven, Control Panel Zotzed

Started by Tinka

Replies: 5
Views: 4728
Last post November 10, 2008, 08:51:41 PM
by Tinka
amana built in double oven

Started by oscar333

Replies: 2
Views: 1998
Last post November 11, 2009, 10:44:40 PM
by oscar333
7" Touch Screen Panel/Module for Late Model Jenn Built-ins (Scrap For Grab)

Started by rmbraught

Replies: 2
Views: 1882
Last post June 18, 2010, 04:05:10 PM
by rmbraught
31-20105 GE & Profile 30 Inch Built-In Wall Oven Service Manual

Started by AJ

Replies: 0
Views: 1145
Last post September 08, 2011, 05:30:49 PM
by AJ
31-9084 GE 27-In. Built-In Electric Wall Oven Service Manual

Started by AJ

Replies: 0
Views: 1406
Last post October 25, 2011, 12:03:22 AM
by AJ