Maytag Centennial TL won't Fill during Wash/Rinse Cycle (MVWC6ESWW1)

[rockinrobin]

This Washer is 2-3 Years Old and it won't fill with water during Wash/Rinse cycle. Also, the tub spins at the beginning of Rinse.
Cleared pressure tube and there's no power going to the Inlet Valve.
Therefore, I need to check VAC on wire harness that connects to the Auto Load Sensing Switch during Fill for Wash/Rinse but don't know which wires to check (maybe Blue & Orange)?
I understand that if I have AC Voltage then Timer is OK and I need to replace Sensing Switch.
Also, do you have a Service Manual for this Washer?
 

[rockinrobin]

I replaced the Timer and it's working normal again. However, if it acts up again then I'll replace the Temperature Switch.

[AJ]

Thanks for the update,