Forum > Refrigerator & Freezer Repair

FRS26R4A Refrigerator No Compressor or Condessor fan

<< < (2/5) > >>

tgoods:
E3 or E5?  Check for a voltage drop between E3 and E8.  If you get 120 vac, the ADC is bad.

alecat:
I checked E3, (sorry typo)so your saying that if the voltage is 120v at both E3 and E8 than the board is bad?
Which terminal should have lower voltage?

tgoods:
No, put one lead of your meter on E3 and the other lead on E8. If you get 120vac, you know your ADC has an open circuit and is bad.

alecat:
Thanks I will try that and report back.

alecat:
I have 0 volts between E# and E8.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version