Had one of these today that was partially disassembled by customer. He thought the "LE" was latch error, and tried to remove the machine from its space. Then started to disassemble the sump assembly 'til he come to the left handed impeller screw, stripped it, then gave up.
I have the manual, and the code info. Further code info was provided by this wonderful forum on this page.
Does the resistance info only show up on the tech sheet (not there)? It's not in the manual.
The motor turns freely, and is plugged in OK. Nothing is jamming it, but one of the capacitors on the board is bubbled and discolored in the goo near the base of it. (the goo is some sort of sealant that covers the entire board about 1/8 of an inch deep) So I figure it needs a new board. Either that, or a new capacitor, but I'm not gonna try replacing that with the goo everywhere.