Hi, sorry to hear about you getting laid off.
Does the washer tub try and spin at all?
Beside the clutch there could be something stuck between the tub and basket keeping it from spinning.
Feel with your hand around the top of the tub to see if you can get lucky and feel something stuck between the two.
If I could not find anything stuck between the tub and basket I would then run the washer in the spin cycle with the cabinet off and the lid switch bypassed.
With the cabinet off and the washer running in the spin cycle I would look at the clutch to see if it's spinning around.
If the clutch is spinning around and the washer basket is not spinning then I would suspect the clutch is slipping.
If the clutch is not spinning then you have a problem with the transmission.
You could also remove the agitator and check the drive block in the spin cycle to make sure it's not stripped out. Most of the time if the drive block is stripped out the washer will be really noisy during the spin cycle.
Your washer uses...
Clutch part # 285785
Drive Block part # 389140
Let us know what you find or if you have any other questions.