Samsung DMT800RHS-XAA

[Patricio]

Any body know something about This DW & code 36 display.   Will make service call tomorrow evening.    Customer says unit will drain, then fill, start the wash cycle, & then stop displaying code 36.   Never have worked on this particular unit, suspect it has something to do with the sump drain, probably needs to be cleaned.   Any & all help is very appeciated.   

PS already checked the 7 page rapid sheet for Samsung DMT800.    Also where would the tech sheet be found, in the door, kick panal if it has one, or somewhere else in the unit.

[Patricio]

The best I can figure is that customer read code wrong & it reads '3E'      Anybody have any thoughts on that?

[canatech]

cant seem to reference that error code.. best l can think of is the 9E error which occurs after filling indicating a alow water level error.. there is a switch assm on the side of the dw that may need cleaning or replacing.. all l got for now

[Patricio]

Should have posted earlier.  Asked homeowner to throw breaker for 5 minutes then power back up.  Machine cycled OK & have not been called back so my guess is the error was just a qlitch.