Author Topic: Kenmore washer, model 110-24632300, fills with water and then nothing...  (Read 2467 times)

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
Washing the 3rd load of clothes, washer filled with water and nothing happened. Power supply is good. I have removed clothes and drained the tub. Now I have no idea where to begin.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Did you check your lid switch?

Sent from my MB865 using Tapatalk 2


Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
How would I check it or would I just replace it to see if thats it? By the way thanks for your reply.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
See if it clicks examine it for looseness or broken lid strike
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
JW,
Lid strike is good. The switch does seem to be pretty loose and no click. O0  When I press switch it doesn't have any spring back. It seems logical so I am going to replace the switch. I see the 2 screws from the top...do I have to remove the basket and tub or is it easier to access from the rear? :thanks:

Mike

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1482
  • Country: us
    • Buy me a beer through paypal

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline mmkscarter

  • VIP Member
  • Member Since: Oct 2012
  • Posts: 4
J.W. and TGood,
I just finished replacing the lid switch and a load is now washing. Thank you very much for your help and the video's showing the repair work were exce;;ent.

 :cheers: :2funny: :thanks:

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1482
  • Country: us
    • Buy me a beer through paypal
 O0

 

My kenmore washer fills with water but will not spin, rinse or drain

Started by Watson88

Replies: 7
Views: 5606
Last post August 08, 2011, 06:02:55 PM
by JWWebster
Maytag washer model LAT3500AAE fills w/water,shuts off, won't start again

Started by 3rdwasherfromcl

Replies: 5
Views: 1284
Last post June 16, 2013, 08:28:09 PM
by 3rdwasherfromcl
Kenmore 90 Series washer: Cold water does not fill wash, but fills rinse

Started by purnell1

Replies: 4
Views: 795
Last post December 02, 2013, 07:52:49 AM
by purnell1
Kenmore Washer 400 series MDL: 28432700 Fills with water then nothing

Started by abranch

Replies: 8
Views: 867
Last post December 04, 2013, 03:32:27 PM
by dab147315
Maytag Washer - Fills with water, then does nothing...

Started by AJ

Replies: 7
Views: 9319
Last post February 21, 2008, 05:34:00 PM
by AJ
Whirlpool Washer Fills Hot Water Only

Started by TechnicianBrian

Replies: 0
Views: 2904
Last post May 09, 2008, 06:57:03 PM
by TechnicianBrian