Maybe I should start a new topic. I hope this gets some attention.
Same Fridge: GE SSH25KFRFWW
Need Manual / Tech sheet.
Came on fridge plugged in. Relay on control board clicking. Compressor not
running, but pretty warm. Relay (discussed above) had hole burned in bottom. Replaced relay.
Nothing. No compressor or fan, relay on board still clicking. Turned off Cold Control, one of these: AP3796849
Plugged back in. Relay still clicking, nothing else.
I don't have a wiring diagram, but the leads to the relay are orange and black. The black lead has wandering voltage, orange is dead. I'd guess that orange should have something, but w/out diagram...
Control board looks OK visually. Tested compressor with test cord & it starts right up.
Any ideas (or manual/tech sheet)?