365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Kenmore Oasis washer 110.28032700 UL problems  (Read 16608 times)

Offline Flash

  • VIP Member
  • Member Since: Jul 2014
  • Posts: 1
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #10 on: July 22, 2014, 11:04:02 PM »
You need to install a spring kit. It comes with 4 new suspension rods with new, upgraded stronger springs. I have made this repair 6+ times in the last year.

Good luck.

Got a FSP part number?

Thanks for this info! I just wanted to confirm: My Kenmore Elite Oasis was getting unbalanced loads more and more often. I ordered W10189077 Washer Suspension Rod Kit and watched this youtube video.



The job was a snap and I likely saved a couple hundred bucks.

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 389
  • Country: us
  • Technician since 1990
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #11 on: July 27, 2014, 04:31:46 PM »
I've been servicing for over 24 years. We service these regularly. Don't worry about the scratches on the tub, certainly don't drill the tub.  Just replace the suspension rods and your problem will be solved

Offline Gu1m4uv3

  • VIP Member
  • Member Since: Jun 2015
  • Posts: 3
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #12 on: June 15, 2015, 07:34:06 PM »
Well, I just replaced the suspension rods and I still have the uL problem :(. What should I do now?
« Last Edit: June 15, 2015, 07:36:34 PM by Gu1m4uv3 »

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 389
  • Country: us
  • Technician since 1990
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #13 on: June 15, 2015, 09:29:22 PM »
Make sure your shaft nut down by your motor hasn't come loose. Also check motor rotor bolt

Offline Gu1m4uv3

  • VIP Member
  • Member Since: Jun 2015
  • Posts: 3
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #14 on: June 25, 2015, 05:19:16 PM »
I can't access the shaft nut or the motor rotor bolt because I cannot remove the rotor/stator plastic cover. The screw is somehow stuck, I can loose it a couple of turn then it start turning in butter.  I manage to remove the inner tub to see if there was clothes stuck between the outer tub and the rotary one and clean the drain pump filter and I realised that the shaft is loose. So I really need to access the bolt underneath but I can't since the plastic cover is not removable.

Please share any thoughts...

Thanks

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 389
  • Country: us
  • Technician since 1990
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #15 on: June 25, 2015, 08:11:06 PM »
Use a 1/4" impact wrench with a Philips bit installed backwards into chuck

Offline Gu1m4uv3

  • VIP Member
  • Member Since: Jun 2015
  • Posts: 3
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #16 on: June 25, 2015, 09:31:45 PM »
You mean to install a Philips bit on the other end of the shaft to prevent it from turning when I force with the hex key?

Offline Maytag Man 6725

  • Technician
  • Member Since: Jul 2014
  • Posts: 389
  • Country: us
  • Technician since 1990
Re: Kenmore Oasis washer 110.28032700 UL problems
« Reply #17 on: June 25, 2015, 09:34:26 PM »
No, a 1/4" Phillips bit, flipped around is the right size hex to fit motor rotor bolt. Use it with an impact wrench to remove

 

Kenmore Elite Oasis Washer

Started by MajorApp

Replies: 8
Views: 9849
Last post February 22, 2009, 02:03:55 PM
by apptech
Kenmore Elite Oasis Washer

Started by cigar7

Replies: 12
Views: 20744
Last post September 03, 2009, 01:18:48 PM
by cigar7
Kenmore Oasis Washer Leaking

Started by TechnicianBrian

Replies: 0
Views: 6460
Last post October 05, 2008, 07:23:38 AM
by TechnicianBrian
Kenmore Elite Oasis HE Washer - oL code

Started by showlowjimbo

Replies: 4
Views: 11937
Last post April 07, 2009, 05:11:15 PM
by Repair-man
Kenmore Elite Oasis HE Washer - oL code

Started by NH

Replies: 0
Views: 4882
Last post April 26, 2010, 01:14:52 AM
by NH
Kenmore Elite Oasis Washer lid lock

Started by jembows

Replies: 1
Views: 6059
Last post June 14, 2010, 10:34:12 PM
by schaffersapplian