CURSED ELECTROLUX FRIDGE

[donsappliances]

MD.       E23CS78ESS0
SER.      4A64227322

I'll spare the horrid history of this job and get straight to the point.

I've replaced pretty much every relay/computer board in the fridge, minus the inverter.
The problem that is happening, is, when you close the freezer door, the ice/water dispenser touchpad will light up, the lights on the ice/water paddles light up, and the most peculiar thing, is that the ice auger inside the freezer will kick out ice through the dispenser, until you open the freezer door up.

I've replaced the dispenser relay board twice, which i'm kinda feeling like both parts were bad from my parts company.
The first board was replaced by my tech, and the touch panel wouldn't light up, but when we re-installed the old relay board, the touch panel lit up.
The 2nd board, I personally installed, and after closer examination, I realized a Capacitor was completely missing.

So, we installed the main computer, and the control housing right next to it, which I don't even know what the hell the control housing does, with the original dispenser relay board, and we still got the same symptom.

So considering the relay control board I had was bad, and i replaced all computer boards, I'm still thinking that the dispenser board is bad.
I'm ordering another board, and i'm going to try one last time.

Does anybody have any insight on this?
Does anybody think it is the dispenser relay board??
Thanks!
Anthony
Dons Appliances

[niobrara]

Don I will have more time to look this up later,but are your light switch's on this model 2 way ?

[Joebeef]

Did you check the micro switch?

[niobrara]

Still haven't been able to find a wiring diagram for this unit. All lights should light up on it . I will get one tomorrow and maybe be able to give you better help. Did I mention I really don't like this unit ether.

[AJ]

Still haven't been able to find a wiring diagram for this unit.

Here is the wiring diagram.

[donsappliances]

3 way door switch, changed that too.
new microswitches, the weird thing is that, even with one lead removed from the switch, it still activated the auger.
and even weirder, is that my tech removed a lead from the auger motor, and the motor still ran.
im at loss...
help!!

[niobrara]

With the wiring diagram AJ put up ,first are all wires correct to the door switch ? Have tried disconnecting the ice maker ? What wire did your tech remove from the motor and it still ran ?

[donsappliances]

ALL WIRES CORRECT TO DOOR SWICH, WE UNPLUGGED ICE MAKER, HE REMOVED THE LINE WIRE FROM THE AUGER MOTOR.
IM REALLY FEELING LIKE ITS THE DISPENSER RELAY BOARD. ILL LET YA KNOW WHAT I FIND.

[niobrara]

I have had a little trouble with there board to the dispenser, plus one of there door switch's that I still don't understander what the heck it was doing. WOW,understatement !! But that auger running  is a new one. Waiting for update.

[donsabol]

try disconnecting the paddles from the board
had one doin the strange found paddle lights were shorted d
disconnected the paddle led from board and fix problem..just lost paddle l.e.d.s