Whirlpool dryer not heating GEQ9800PWZ

[Chad2008]

Hello everybody.
Have a Whirlpool dryer (model GEQ9800PWZ) that won't heat up. I have changed the Element, Thermal cut-offs (both were burnt out), and the thermal fuse. Even after changing all 4 pieces, the dryer still will not heat up.
The only thing that I can think of is maybe the Accutemp switch in the control panel? I'm stumped and could use some help. Thanks in advance and take care.

[JWWebster]

On the blower housing the control thermostat next to the fuse did you check that?

[PerrysRepair]

Have you verified proper voltage present at the outlet and terminal block?

[Chad2008]

I did check the voltage and it's good.
I completely forgot about the control tstat. Thanks JW.