Free Service - Appliance Repair Help & Troubleshooting

Author Topic: Samsung WF 1124 XAC MEMS sensor 8E error code  (Read 73 times)

Offline mario piloto

  • VIP Member
  • Member Since: Feb 2017
  • Posts: 2
Samsung WF 1124 XAC MEMS sensor 8E error code
« on: February 11, 2017, 12:11:04 PM »
Hi everyone,

My washer was getting intermitent 3E error motor due to a dirty connection between the MEMS sensor and the wires which go to the front board panel. I decided to clean every pin in the connection and, when I tried to install all the pins back, I had a MEMS sensor error 8E. The BIG MISTAKE is that I did not take pictures before pulling the pins out, so I have no idea which wire connects to his right one. Can anybody help me?

Thanks

Offline mario piloto

  • VIP Member
  • Member Since: Feb 2017
  • Posts: 2
Re: Samsung WF 1124 XAC MEMS sensor 8E error code
« Reply #1 on: February 11, 2017, 12:13:17 PM »
If someone can get a picture of both MEMS and front board, showing this connections, It would be appreciated. Part number : DC41-001770

 

SAMSUNG WASHER WITH 1E ERROR CODE--PRESSURE SENSOR

Started by helpful Hal

Replies: 0
Views: 332
Last post March 12, 2016, 08:58:15 AM
by helpful Hal
e83 error code on samsung top load model wa5471ab ?? and need service

Started by itsastarr

Replies: 2
Views: 4570
Last post August 18, 2013, 05:23:37 PM
by Cananot
Samsung (WF350ANW/XAA) - Error Code LO: Need Service Manual

Started by rockinrobin

Replies: 1
Views: 4015
Last post November 28, 2013, 11:16:14 AM
by danhausman
Samsung Washer WF328AAW - Popping an E3 Error Code - BUCKING

Started by Blaiser

Replies: 1
Views: 1815
Last post February 20, 2014, 08:52:53 AM
by VOGUSLAVKY
Samsung Topload (WA456DRHDWR): Help with Error Code 3E

Started by rockinrobin

Replies: 4
Views: 5586
Last post July 15, 2014, 12:07:41 PM
by schleven
Samsung Top Load Washer - 8E Error Code

Started by Blaiser

Replies: 2
Views: 4253
Last post December 10, 2014, 11:43:35 PM
by domain