Hello everybody.
I've got a GE front loader (model WHDVH626FWW) that seems to have some gremlins in it. It won't always spin out and it will reset the cycle time as well. I ran it through a cycle with no clothes in it and it functioned fine. Then I tried one with a blanket and it didn't spin out. I cleaned out the drain filter (which was plugged) and tried it again to be sure that it just wouldn't spin because it was too heavy.
After I cleaned that filter, I started another cycle and it got down to 1 minute and reset back to 15 minutes.
I was thinking that maybe the control board is going bad, but I'm not really sure. Anybody have any ideas? Thanks in advance and take care.