Maytag MTW5740TQ0 Porforma with bad vibration

[asb]

I have a maytag perfoma washer that has a bad vibration when is spin cycle and has progressively gotten worst. I do not know where to start, would bad bearings do this?
MTW5740TQ0

[haroldsappliance]

This washer has self leveling legs on the back. When there working properly you can lean forward and set back down and it will self level. I would make sure that unit is right. Also is unit on a good solid foundation? Other possibilities include the balance ring. Diagram 3 part 17. This could be faulty.
387240

[JWWebster]

Check to see if you skate plate is correct:

[blondejon]

I got a hold of one of these that would about walk itself out the door in spin cycle.  The suspension pads were wore down.

[asb]

Going to dig into it this weekend. What is the part number for the suspension pads?
Thanks for the replies.

[tgoods]

If it has worn down to metal to metal contact, you should replace the skate plate which comes with all of the suspension pads.  This requires a complete breakdown of the washer. It's tough to do but you can replace just the pads without tearing down the machine.
Skate plate 3946509
285219
285744