Maytag MDE9700AYW service manual

[Bill]

I can'ty seem to find a service manual o0r wiring diagram for this maytag dryer. Found a MED9700 but does not appear to be the same but very simular. The dryer starts to run but after a couple of minutes i get and HE code. Suspect it means heater element. I have already checked the element and all limits are good. I'm thinking thermistor or control module. I verified that control module has power on Normally open side but does not close. Thanks for any help. Not sure what resistance the thermistor shopuld be. I think i read around 8600K at room temp of approx. 70F.

[AJ]

From the tech sheet, copy attached.

HE = Heater Error

Invalid heating temperature in running the dryer

Check for:

- Restricted vent system.

- Check Thermistor resistance.

Not sure what resistance the thermistor shopuld be. I think i read around 8600K at room temp of approx. 70F.

Also from the tech sheet...

10k ohms @ 77F

I can't seem to find a service manual or wiring diagram for this maytag dryer.

Here is the service manual for the MDE9700
http://appliancejunk.com/forums/index.php?action=store;sa=view;id=102

Diagram & Parts for the MDE9700AYW

Hope that helps.