Kenmore Elite HE3 11084832201 electric front load dryer not heating

[Mitchell]

My dryer runs, but there is no heat. I checked the fuse and have replaced the heating element, thermal fuse and thermistor. I just ordered the thermal cut off and hi limit thermostat. Any suggestions on what the problem could be? Dying to have my dryer back!! Thank you

11084832201

[JWWebster]

Usually the thermal cut off 300f smaller limit on the heater housing is the culprit. The larger limit 250f near the rear of the heater housing comes in the same kit. Usually the vent to outside is blocked if that small one trips.

[Mitchell]

how can i test the cut off to make sure?

[haroldsappliance]

You should have continuity thru thermal link as well as thermostat. Find which lead to your element is lacking proper voltage and trace it back to the problem.

[dab147315]

Basic First. Are you getting 230 volts to back off dryer.Dryer can run on one leg of power with no heat.