Author Topic: JSP46DN1WW loose glass on oven door  (Read 2377 times)

Offline Debi

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 1
JSP46DN1WW loose glass on oven door
« on: July 31, 2012, 02:27:04 PM »
The outer glass panel on my oven door is loose and ready to fall off. It appears to be held in place at the top in channels provided by three clips. At the bottom the glass appears to rest on a thin sheet metal ridge (not a channel). It also looks like it is supposed to be held in place by two sided tape. There are no part numbers for this item and I would prefer to not have to replace the entire door assembly. Can anyone recommend a repair for this?

JSP46DN1WW

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 616
  • Country: us
    • Appliance repair
Re: JSP46DN1WW loose glass on oven door
« Reply #1 on: July 31, 2012, 03:09:04 PM »
Oven door P# wb57t10344.  I have seen where a spacer was left out, which can cause this problem. This is a very poor design and it has to be right or the glass can and will fall right out on the floor. It should have a small track on the bottom, and you might consider some two sided tape. Spacer p# wb02t10344.

 

Thermador PRD304EHC/01 Oven door glass and hinges

Started by pmoir

Replies: 9
Views: 4237
Last post March 24, 2013, 08:48:21 PM
by pmoir
Wall oven damage glass and door broken, are replacement parts available?

Started by bobbiec

Replies: 2
Views: 3321
Last post June 30, 2014, 10:18:41 AM
by bobbiec
Frigidaire Range, Oven Door falls Open

Started by TechnicianBrian

Replies: 0
Views: 5076
Last post August 23, 2008, 08:29:17 AM
by TechnicianBrian
***SELF-CLEANING OVEN DOOR LOCKED OPEN***

Started by chuckd

Replies: 1
Views: 6492
Last post November 21, 2008, 03:50:08 AM
by Repair-man
hbl 645 AUC Bosch Oven Door Hinges

Started by emmerat

Replies: 9
Views: 18989
Last post August 08, 2012, 07:27:13 AM
by jackminster
HGS5052UC Bosch Does Oven Door Have to SHut All the Way?

Started by podville

Replies: 8
Views: 7692
Last post December 19, 2009, 05:32:22 PM
by Repair-man