Frigidaire front load washer

[haroldsappliance]

Frigidaire front load washer model# ltf2140fs2 will not operate or go into diagnostic mode. To put into diagnostic mode you must first clear the lights by pressing cancel button, but all I'm getting is three beeps and the continuation of the lights blinking. Lock is good. I'm thinking this washer must have a faulty main board. Just wondering if anyone has run into this particular problem. Thanks.

[JWWebster]

Has it got standing water in it?

[haroldsappliance]

None

[RegUS_PatOff]

... you must first clear the lights by pressing cancel button

... but first, turn Dial to Drain / Spin

[scrapiron]

This may be a dumb question, but does this model have a "control lock" that might to activated? Just askin'

[bigbuck]

Some models have a soap drawer magnet switch, make sure this is operating.

Sent from my MB865 using Tapatalk 2

[haroldsappliance]

Control board installed. Problem solved.

[AJ]

Good to know, thanks for the update.