Author Topic: Dishwasher stuck at 39 minutes. Already replaced the control board.  (Read 1127 times)

Offline handy-man

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 2
Thanks for this great site. It's helped me a lot in the past, but I'm stuck on this dishwasher.

I'm working on a Whirlpool dishwasher model number GU2700XTSB1.

It gets to 39 minutes and keeps running forever. I have already replace the electronic control board part # W10084141 and it still has the same problem. Any advice would be really appreciated.

Offline Bailey

  • Technician
  • Member Since: Dec 2011
  • Posts: 618
  • Country: us
Most dishwashers today heat the water at a certain point in the cycle. There is a thermostat attached to the bottom of the tub that is looking for a certain
temperature and will not allow the cycle to advance untill it sees it. There may be a tech sheet on the dishwasher with a cycle chart that shows where in the cycle this occurs. If this is the problem you will be looking at a thermostat or element failure.

Offline handy-man

  • VIP Member
  • Member Since: Jul 2012
  • Posts: 2
The tech sheet is missing. Would you have a copy I could download?

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9242
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
I have attached a copy of the tech sheet for you.

Your model dishwasher uses Heating Element Part # W10134009

Let us know what you find or if you have any more questions.
Follow us on Google+ to see updates from our Google Drive and more!

Offline andersenappliance

  • Technician
  • Member Since: Feb 2012
  • Posts: 634
  • Country: us
Re: Dishwasher stuck at 39 minutes. Already replaced the control board.
« Reply #4 on: September 26, 2012, 09:09:04 PM »
I had a problem w/ a basic GE model that would not advance.  Timer was good, heater was good, thermostats were good.

I ended up putting a dab of alumilastic cement (like they use on icemakers) on the thermostat.  Worked like a charm.  I figure if the cement moves heat (or the lack thereof) in an icemaker, it'd do the same in a dishwasher.   8)

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1145
Re: Dishwasher stuck at 39 minutes. Already replaced the control board.
« Reply #5 on: September 26, 2012, 09:35:59 PM »
The things we come up with ! I gotta try that.

 

99003160 Maytag Dishwasher Control Board

Started by AJ

Replies: 0
Views: 2584
Last post May 05, 2009, 03:06:33 PM
by AJ
99002825 Maytag Dishwasher Control Board

Started by AJ

Replies: 0
Views: 3658
Last post June 05, 2009, 03:22:39 PM
by AJ
12002709 Maytag Dishwasher Control Board

Started by AJ

Replies: 0
Views: 3136
Last post June 06, 2009, 03:46:02 PM
by AJ
8546558 Whirlpool Dishwasher Control Board

Started by AJ

Replies: 0
Views: 2736
Last post June 08, 2009, 12:26:54 PM
by AJ
99002824 Maytag Dishwasher Main Control Board PCB

Started by AJ

Replies: 0
Views: 4797
Last post June 17, 2009, 07:51:35 PM
by AJ
154543602 Frigidaire Dishwasher Control Board

Started by AJ

Replies: 0
Views: 3000
Last post June 26, 2009, 08:34:58 AM
by AJ